PIC24HJ128GP510-I/PF Microchip Technology, PIC24HJ128GP510-I/PF Datasheet - Page 40

• Manufacturer Part Number: PIC24HJ128GP510-I/PF
• Description: IC PIC MCU FLASH 64KX16 100TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ128GP510-I/PF

• Core Size: 16-Bit
• Program Memory Size: 128KB (43K x 24)
• Oscillator Type: Internal
• Core Processor: PIC
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 32x10b/12b
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Controller Family/series: PIC24
• No. Of I/o's: 85
• Ram Memory Size: 8KB
• Cpu Speed: 32MHz
• No. Of Timers: 9
• No. Of Pwm: RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDDM300024 - KIT DEMO DSPICDEM 1.1MA240012 - MODULE PLUG-IN PIC24H 100QFPDV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32AC164323 - MODULE SKT FOR 100TQFP
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC24H
10.6
The MPLAB ICD 2 In-Circuit Debugger is a powerful,
low-cost, run-time development tool that uses in-circuit
debugging capability built into the PIC24H Flash
devices. This feature, along with Microchip’s In-Circuit
Serial Programming™ (ICSP™) protocol, gives you
cost-effective, in-circuit debugging from the graphical
user interface of MPLAB IDE. It lets you develop and
debug source code by watching variables, single-
stepping and setting breakpoints, as well as running at
full speed to test hardware in real time.
The MPLAB ICD 2 has these features:
• Full-speed operation to the range of the device
• Serial or USB PC connector
• USB-powered from PC interface
• Low noise power (V
• Operation down to 2.0V
• Can be used as debugger and inexpensive serial
• Some device resources required (80 bytes of
FIGURE 10-4:
10.7
The MPLAB PM3 Universal Device Programmer is easy
to use with a PC, or as a stand-alone unit, to program
Microchip’s entire line of PICmicro MCU devices as well
as the latest PIC24H DSC devices. The MPLAB PM3
features a large and bright LCD unit (128 x 64 pixels) to
display easy menus, programming statistics and status
information.
The MPLAB PM3 programmer has exceptional
programming speed for high production throughput,
especially important for large memory devices. It also
includes a Secure Digital/Multimedia Card slot for easy
and secure data storage and transfer.
DS70166A-page 38
analog and other noise sensitive applications
programmer
RAM and 2 pins)
MPLAB ICD 2 In-Circuit Debugger
MPLAB PM3 Universal Device
Programmer
PP
MPLAB
DEBUGGER
and V
DD
®
ICD 2 IN-CIRCUIT
) for use with
Preliminary
The MPLAB PM3 programmer is designed with
40 programmable socket pins and therefore, each
socket module can be configured to support many
different devices. As a result, fewer socket modules are
required to support the entire line of Microchip parts.
The socket modules use multi-pin connectors for high
reliability and quick interchange.
When connected to a PC host system, the MPLAB
PM3 programmer is seamlessly integrated with the
MPLAB Integrated Development Environment (IDE),
providing a user-friendly programming interface.
Key features of the MPLAB PM3 Programmer include:
• RS-232 or USB interface
• Integrated In-Circuit Serial Programming (ICSP)
• Fast programming time
• Three operating modes:
• Complete line of interchangeable socket modules
• SQTP
• An alternate DOS command line interface for
• Large easy-to-read display
• Field upgradeable firmware allows quick new
• Secure Digital (SD) and Multimedia Card (MMC)
• Buzzer notification for noisy environments
FIGURE 10-5:
interface
- PC Host mode for full control
- Safe mode for secure data
- Stand-Alone mode for programming without
to support all Microchip devices and package
options (sold separately)
serial numbers while in PC Host mode.
batch control
device support
external memory support
a PC
SM
serialization for programming unique
MPLAB
PROGRAMMER
© 2005 Microchip Technology Inc.
®
PM3 DEVICE