PIC18LF8720-I/PT Microchip Technology, PIC18LF8720-I/PT Datasheet - Page 14
![no-image](/images/manufacturer_photos/0/4/439/microchip_technology_sml.jpg)
PIC18LF8720-I/PT
Manufacturer Part Number
PIC18LF8720-I/PT
Description
IC MCU FLASH 64KX16 LV 80-TQFP
Manufacturer
Microchip Technology
Series
PIC® 18Fr
Datasheets
1.PIC16F616T-ISL.pdf
(8 pages)
2.PIC18F8520T-IPT.pdf
(380 pages)
3.PIC18F8520T-IPT.pdf
(40 pages)
4.PIC18F6620-IPT.pdf
(14 pages)
5.PIC18F6620-IPT.pdf
(12 pages)
Specifications of PIC18LF8720-I/PT
Core Size
8-Bit
Program Memory Size
128KB (64K x 16)
Core Processor
PIC
Speed
25MHz
Connectivity
EBI/EMI, I²C, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, LVD, POR, PWM, WDT
Number Of I /o
68
Program Memory Type
FLASH
Eeprom Size
1K x 8
Ram Size
3.75K x 8
Voltage - Supply (vcc/vdd)
2 V ~ 5.5 V
Data Converters
A/D 16x10b
Oscillator Type
External
Operating Temperature
-40°C ~ 85°C
Package / Case
80-TFQFP
Controller Family/series
PIC18
No. Of I/o's
68
Eeprom Memory Size
1024Byte
Ram Memory Size
3.75KB
Cpu Speed
25MHz
No. Of Timers
5
Processor Series
PIC18LF
Core
PIC
Data Bus Width
8 bit
Data Ram Size
3840 B
Interface Type
I2C, SPI, USART
Maximum Clock Frequency
40 MHz
Number Of Programmable I/os
68
Number Of Timers
2 x 8 bit
Operating Supply Voltage
2 V to 5.5 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
Development Tools By Supplier
PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DM183032, DM183022, DV164136
Minimum Operating Temperature
- 40 C
On-chip Adc
16 bit
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
PIC18LF8720-I/PT
Manufacturer:
Vishay
Quantity:
9 195
Company:
Part Number:
PIC18LF8720-I/PT
Manufacturer:
Microchip Technology
Quantity:
10 000
Part Number:
PIC18LF8720-I/PT
Manufacturer:
MICROCHIP/微芯
Quantity:
20 000
Part Number:
PIC18LF8720-I/PTC01
Manufacturer:
MICROCH
Quantity:
20 000
PIC18FXX20
3.2.1
The programming example presented in Section 3.2
utilizes multi-panel programming. This technique
greatly decreases the total amount of time necessary to
completely program a device and is the recommended
method of completely programming a device.
There may be situations, however, where it is
advantageous to limit writes to a single panel. In such
cases, the user only needs to disable the multi-panel
write feature of the device by appropriately configuring
the programming control register located at 3C0006h.
The single panel that will be written will automatically
be enabled based on the value of the Table Pointer.
3.2.2
All of the programming examples up to this point have
assumed that the device has been bulk erased prior to
programming (see Section 3.1). It may be the case,
however, that the user wishes to modify only a section
of an already programmed device.
The minimum amount of data that can be written to the
device is 8 bytes. This is accomplished by placing the
device in Single Panel Write mode (see Section 3.2.1),
loading the 8-byte write buffer for the panel, and then
initiating a write sequence. In this case, however, it is
assumed that the address space to be written already
has data in it (i.e., it is not blank).
DS39583C-page 14
Note:
Even though multi-panel writes are dis-
abled, the user must still fill the 8-byte write
buffer for the given panel.
SINGLE PANEL PROGRAMMING
MODIFYING CODE MEMORY
The minimum amount of code memory that may be
erased at a given time is 64 bytes. Again, the device
must be placed in Single Panel Write mode. The
EECON1 register must then be used to erase the
64-byte target space prior to writing the data.
When using the EECON1 register to act on
code memory, the EEPGD bit must be set
(EECON1<7> = 1) and the CFGS bit must be cleared
(EECON1<6> = 0). The WREN bit must be set
(EECON1<2> = 1) to enable writes of any sort (e.g.,
erases), and this must be done prior to initiating a
write sequence. The FREE bit must be set
(EECON1<4> = 1) in order to erase the program
space being pointed to by the Table Pointer. The
erase sequence is initiated by the setting the WR bit
(EECON1<1> = 1). It is strongly recommended that
the WREN bit be set only when absolutely necessary.
To help prevent inadvertent writes when using the
EECON1 register, EECON2 is used to “enable” the WR
bit. This register must be sequentially loaded with 55h
and then AAh, immediately prior to asserting the WR bit
in order for the write to occur.
The erase will begin on the falling edge of the 4th
SCLK, after the WR bit is set. After the erase sequence
terminates, SCLK must still be held low for the time
specified by parameter #P10 to allow high voltage
discharge of the memory array.
2010 Microchip Technology Inc.