C8051F996-GM Silicon Laboratories Inc, C8051F996-GM Datasheet - Page 70
![IC MCU 8BIT 8KB FLASH 24QFN](/photos/12/15/121587/c8051f9xx_24-qfn_sml.jpg)
C8051F996-GM
Manufacturer Part Number
C8051F996-GM
Description
IC MCU 8BIT 8KB FLASH 24QFN
Manufacturer
Silicon Laboratories Inc
Series
C8051F9xxr
Specifications of C8051F996-GM
Program Memory Type
FLASH
Program Memory Size
8KB (8K x 8)
Package / Case
24-UQFN Exposed Pad, 24-HUQFN
Core Processor
8051
Core Size
8-Bit
Speed
25MHz
Connectivity
SMBus (2-Wire/I²C), SPI, UART/USART
Peripherals
Brown-out Detect/Reset, Cap Sense, POR, PWM, Temp Sensor, WDT
Number Of I /o
17
Ram Size
512 x 8
Voltage - Supply (vcc/vdd)
1.8 V ~ 3.6 V
Data Converters
A/D 10x12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Processor Series
C8051F9x
Core
8051
Data Ram Size
512 B
Interface Type
I2C, SMBus, Enhanced UART, Enhanced SPI
Maximum Clock Frequency
7 KHz
Number Of Programmable I/os
17
Number Of Timers
4
Operating Supply Voltage
2.4 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
PK51, CA51, A51, ULINK2
Development Tools By Supplier
C8051F996DK
Minimum Operating Temperature
- 40 C
On-chip Adc
12 bit, 10 Channel
On-chip Dac
10 bit, 4 Channel
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
336-1943-5
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
C8051F996-GM
Manufacturer:
SILICON
Quantity:
570
- Current page: 70 of 322
- Download datasheet (3Mb)
C8051F99x-C8051F98x
5.2.5. Gain Setting
The ADC has gain settings of 1x and 0.5x. In 1x mode, the full scale reading of the ADC is determined
directly by V
The 0.5x gain setting can be useful to obtain a higher input Voltage range when using a small V
voltage, or to measure input voltages that are between V
controlled by the AMP0GN bit in register ADC0CF.
5.3.
Setting the ADC08BE bit in register ADC0CF to 1 will put the ADC in 8-bit mode.In 8-bit mode, only the
8 MSBs of data are converted, allowing the conversion to be completed in two fewer SAR clock cycles
than a 10-bit conversion. This can result in an overall lower power consumption since the system can
spend more time in a low power mode. The two LSBs of a conversion are always 00 in this mode, and the
ADC0L register will always read back 0x00.
5.4.
C8051F980/6 and C8051F990/6 devices have an enhanced SAR converter that provides 12-bit resolution
while retaining the 10- and 8-bit operating modes of the other devices in the family. When configured for
12-bit conversions, the ADC performs four 10-bit conversions using four different reference voltages and
combines the results into a single 12-bit value. Unlike simple averaging techniques, this method provides
true 12-bit resolution of AC or DC input signals without depending on noise to provide dithering. The
converter also employs a hardware Dynamic Element Matching algorithm that reconfigures the largest
elements of the internal DAC for each of the four 10-bit conversions to cancel the any matching errors,
enabling the converter to achieve 12-bit linearity performance to go along with its 12-bit resolution. For
best performance, the Low Power Oscillator should be selected as the system clock source while taking
12-bit ADC measurements.
The 12-bit mode is enabled by setting the AD012BE bit (ADC0AC.7) to logic 1 and configuring Burst Mode
for four conversions as described in Section 5.2.3. The conversion can be initiated using any of the
methods described in Section 5.2.1, and the 12-bit result will appear in the ADC0H and ADC0L registers.
Since the 12-bit result is formed from a combination of four 10-bit results, the maximum output value is
4 x (1023) = 4092, rather than the max value of (2^12 – 1) = 4095 that is produced by a traditional 12-bit
converter. To further increase resolution, the burst mode repeat value may be configured to any multiple of
four conversions. For example, if a repeat value of 16 is selected, the ADC0 output will be a 14-bit number
(sum of four 12-bit numbers) with 13 effective bits of resolution.
5.5.
The SAR converter provides a low power mode that allows a significant reduction in operating current
when operating at low SAR clock frequencies. Low power mode is enabled by setting the AD0LPM bit
(ADC0PWR.7) to 1. In general, low power mode is recommended when operating with SAR conversion
clock frequency at 4 MHz or less. See the Electrical Characteristics chapter for details on power
consumption and the maximum clock frequencies allowed in each mode. Setting the Low Power Mode bit
reduces the bias currents in both the SAR converter and in the High-Speed Voltage Reference.
70
8-Bit Mode
12-Bit Mode (C8051F980/6 and C8051F990/6 devices only)
Low Power Mode
REF
. In 0.5x mode, the full-scale reading of the ADC occurs when the input voltage is V
Rev. 1.0
REF
and V
DD
. Gain settings for the ADC are
REF
x 2.
REF
Related parts for C8051F996-GM
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![500SAAB8M00000ACF](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
SMD/C°/SINGLE-ENDED OUTPUT SILICON OSCILLATOR
Manufacturer:
Silicon Laboratories Inc
![SI3210MFT](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
Manufacturer:
Silicon Laboratories Inc
Datasheet:
![4010-DAAKF_868](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
N/A N/A/SI4010 AES KEYFOB DEMO WITH LCD RX
Manufacturer:
Silicon Laboratories Inc
Datasheet:
![4010-DASKF_868](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
N/A N/A/SI4010 SIMPLIFIED KEY FOB DEMO WITH LED RX
Manufacturer:
Silicon Laboratories Inc
Datasheet:
![4432-SEB1 C 915](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
N/A/-40 TO 85 OC/EZLINK MODULE; F930/4432 HIGH BAND (REV E/B1)
Manufacturer:
Silicon Laboratories Inc
![4432-SEB1 D 470](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
EZLink Module; F930/4432 Low Band (rev e/B1)
Manufacturer:
Silicon Laboratories Inc
![4460-TCE10D434-EK](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
I°/4460 10 DBM RADIO TEST CARD 434 MHZ
Manufacturer:
Silicon Laboratories Inc
![4461-TSQ14D868-EK](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
I°/4461 14 DBM RADIO TEST CARD 868 MHZ
Manufacturer:
Silicon Laboratories Inc
![4463-TCE20C460-EK](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
I°/4463 20 DBM RFSWITCH RADIO TEST CARD 460 MHZ
Manufacturer:
Silicon Laboratories Inc
![4463-TCE20C868-EK](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
I°/4463 20 DBM RADIO TEST CARD 868 MHZ
Manufacturer:
Silicon Laboratories Inc
![4463-TCE27F868-EK](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
I°/4463 27 DBM RADIO TEST CARD 868 MHZ
Manufacturer:
Silicon Laboratories Inc
![4463-TCE30E915S-EK](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
I°/4463 SKYWORKS 30 DBM RADIO TEST CARD 915 MHZ
Manufacturer:
Silicon Laboratories Inc
![4463-TCE30E915R-EK](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
N/A N/A/-40 TO 85 OC/4463 RFMD 30 DBM RADIO TEST CARD 915 MHZ
Manufacturer:
Silicon Laboratories Inc
![4463-TSQ20D169-EK](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_tmb.jpg)
Part Number:
Description:
I°/4463 20 DBM RADIO TEST CARD 169 MHZ
Manufacturer:
Silicon Laboratories Inc