C8051F505-IQ Silicon Laboratories Inc, C8051F505-IQ Datasheet - Page 245

• Manufacturer Part Number: C8051F505-IQ
• Description: IC 8051 MCU 32K FLASH 48-QFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F50xr

Specifications of C8051F505-IQ

• Program Memory Type: FLASH
• Program Memory Size: 32KB (32K x 8)
• Package / Case: 48-QFP
• Mfg Application Notes: LIN Bootloader AppNote
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 50MHz
• Connectivity: EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 40
• Ram Size: 4.25K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.25 V
• Data Converters: A/D 32x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Processor Series: C8051F5x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 4.25 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 40
• Number Of Timers: 4
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F500DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 32-ch x 12-bit
• Package: 48PQFP
• Device Core: 8051
• Family Name: C8051F50x
• Maximum Speed: 50 MHz
• Operating Supply Voltage: 2.5|3.3|5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1527 - KIT DEV FOR C8051F50X
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1520

24.2. Data Format
UART0 has a number of available options for data formatting. Data transfers begin with a start bit (logic
low), followed by the data bits (sent LSB-first), a parity or extra bit (if selected), and end with one or two
stop bits (logic high). The data length is variable between 5 and 8 bits. A parity bit can be appended to the
data, and automatically generated and detected by hardware for even, odd, mark, or space parity. The stop
bit length is selectable between 1 and 2 bit times, and a multi-processor communication mode is available
for implementing networked UART buses. All of the data formatting options can be configured using the
SMOD0 register, shown in SFR Definition 24.2. Figure 24.2 shows the timing for a UART0 transaction
without parity or an extra bit enabled. Figure 24.3 shows the timing for a UART0 transaction with parity
enabled (PE0 = 1). Figure 24.4 is an example of a UART0 transaction when the extra bit is enabled
(XBE0 = 1). Note that the extra bit feature is not available when parity is enabled, and the second stop bit
is only an option for data lengths of 6, 7, or 8 bits.
SPACE
SPACE
MARK
MARK
BIT TIMES
BIT TIMES
SPACE
MARK
BIT TIMES
START
START
BIT
BIT
START
Figure 24.2. UART0 Timing Without Parity or Extra Bit
BIT
D
D
Figure 24.4. UART0 Timing With Extra Bit
0
0
Figure 24.3. UART0 Timing With Parity
D
0
D
D
1
1
N bits; N = 5, 6, 7, or 8
N bits; N = 5, 6, 7, or 8
D
1
N bits; N = 5, 6, 7, or 8
Rev. 1.2
D
D
N-2
N-2
D
N-2
D
D
N-1
N-1
C8051F50x/F51x
D
N-1
PARITY
EXTRA
STOP
BIT 1
STOP
STOP
BIT 1
BIT 1
Optional
(6,7,8 bit
STOP
BIT 2
Data)
Optional
Optional
(6,7,8 bit
(6,7,8 bit
STOP
STOP
BIT 2
Data)
BIT 2
Data)
245