R5F21256SNFP#U0 Renesas Electronics America, R5F21256SNFP#U0 Datasheet - Page 275

• Manufacturer Part Number: R5F21256SNFP#U0
• Description: IC R8C MCU FLASH 32K 52LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/2x/25r

Specifications of R5F21256SNFP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, Voltage Detect, WDT
• Number Of I /o: 41
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 52-LQFP
• For Use With: R0K521256S000BE - KIT EVAL STARTER FOR R8C/25
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Rev.2.00 Oct 17, 2005
REJ09B0001-0200
5.4 Returning from Interrupt Routines
Chapter 5
When the REIT instruction is executed at the end of the interrupt routine, the contents of the FLG register
and PC that have been saved to the stack area immediately preceding the interrupt sequence are automati-
cally restored. Then control returns to the routine that was under execution before the interrupt request was
acknowledged.
If any registers were saved in the interrupt routine using a program, be sure to restore them using an
instruction (e.g., the POPM instruction) before executing the REIT instruction.
Interrupts
page 255 of 263
5.4 Returning from Interrupt Routines