MC912D60ACFUE8 Freescale Semiconductor, MC912D60ACFUE8 Datasheet - Page 287

• Manufacturer Part Number: MC912D60ACFUE8
• Description: IC MCU 16BIT 8MHZ 80-QFP
• Manufacturer: Freescale Semiconductor
• Series: HC12r

Specifications of MC912D60ACFUE8

• Core Processor: CPU12
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: CAN, MI Bus, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 48
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x8/10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-QFP
• Processor Series: HC912D
• Core: HC12
• Data Bus Width: 16 bit
• Data Ram Size: 2 KB
• Interface Type: CAN, SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 68
• Operating Supply Voltage: 3 V to 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PURDS — Pull-Up Register for Port S
MC68HC912D60A — Rev. 3.1
Freescale Semiconductor
RESET:
Bit 7
0
0
RDPS2
6
0
RDPS2 — Reduce Drive of Port S[7:4]
RDPS1 — Reduce Drive of Port S[3:2]
RDPS0 — Reduce Drive of Port S[1:0]
PUPS2 — Pull-up Port S[7:4] Enable
PUPS1 — Pull-up Port S[3:2] Enable
PUPS0 — Pull-up Port S[1:0] Enable
0 = Port S[7:4] output drivers operate normally
1 = Port S[7:4] output pins have reduced drive capability for lower
0 = Port S[3:2] output drivers operate normally
1 = Port S[3:2] output pins have reduced drive capability for lower
0 = Port S[1:0] output drivers operate normally
1 = Port S[1:0] output pins have reduced drive capability for lower
0 = No internal pull-ups on port S[7:4]
1 = Port S[7:4] input pins have an active pull-up device. If a pin is
0 = No internal pull-ups on port S[3:2]
1 = Port S[3:2] input pins have an active pull-up device. If a pin is
0 = No internal pull-ups on port S[1:0]
1 = Port S[1:0] input pins have an active pull-up device. If a pin is
RDPS1
5
0
power and less noise
power and less noise
power and less noise
programmed as output, the pull-up device becomes inactive.
programmed as output, the pull-up device becomes inactive.
programmed as output, the pull-up device becomes inactive.
Multiple Serial Interface
RDPS0
4
0
3
0
0
PUPS2
2
0
PUPS1
1
0
Multiple Serial Interface
PUPS0
Bit 0
0
Technical Data
$00D9
Port S
287