EP9315-IB Cirrus Logic Inc, EP9315-IB Datasheet - Page 5
![IC ARM920T MCU 200MHZ 352-PBGA](/photos/12/23/122388/ep9315-ib_sml.jpg)
EP9315-IB
Manufacturer Part Number
EP9315-IB
Description
IC ARM920T MCU 200MHZ 352-PBGA
Manufacturer
Cirrus Logic Inc
Series
EP9r
Specifications of EP9315-IB
Core Processor
ARM9
Core Size
16/32-Bit
Speed
200MHz
Connectivity
EBI/EMI, EIDE, Ethernet, I²C, IrDA, Keypad/Touchscreen, PCMCIA, SPI, UART/USART, USB
Peripherals
AC'97, DMA, I²:S, LCD, LED, MaverickKey, POR, PWM, WDT
Number Of I /o
16
Program Memory Type
ROMless
Ram Size
32K x 8
Voltage - Supply (vcc/vdd)
1.65 V ~ 3.6 V
Data Converters
A/D 8x12b
Oscillator Type
External
Operating Temperature
-40°C ~ 85°C
Package / Case
352-BGA
Processor Series
EP93xx
Core
ARM920T
Data Bus Width
32 bit
3rd Party Development Tools
MDK-ARM, RL-ARM, ULINK2
Development Tools By Supplier
EDB9315A-Z
For Use With
598-1144 - KIT DEVELOPMENT EP9315 ARM9
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Eeprom Size
-
Program Memory Size
-
Lead Free Status / Rohs Status
No
Other names
598-1262
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
EP9315-IBZ
Manufacturer:
CIRRUS
Quantity:
13
Company:
Part Number:
EP9315-IBZ
Manufacturer:
CIRRUS
Quantity:
347
USB
ExtensionID Register
Reset
Boot Configuration
ER638E2B
Description 1
USB clock divider logic operates at a maximum rate of 288MHz under worst case conditions.
Workaround
When using USB, make sure the clock frequency supplied to the USB clock divider does not exceed
288MHz. The clock supplied to the USB clock divider is sourced by PLL2. The USB clock divider is
controlled by the USBDIV setting in the CLKSET2 register. For example, configure PLL2 to output 192MHz
and USBDIV to divide by four. Ensure that the new PLL2 setting does not adversely affect any other block
using PLL2 as its clock source.
Description
The PartID field in register 0x8083_2714, ExtensionID, is not programmed.
Workaround
None, this register has been de-featured from the chip.
Description
The processor may boot into an invalid state upon initial power up of the device. When this condition occurs,
the processor will not complete its boot sequence and requires an additional power on reset (POR) to be
applied.
Workaround
Implement the recommended external reset circuit described in AN258, “EP93xx Power-up and Reset
Lockup Workaround,” which can be found at http://www.cirrus.com/en/pubs/appNote/AN258REV2.pdf.
Description
The processor may incorrectly latch the state of the CSn[7:6, 3:0] lines. The only problematic effect of this
condition is that the device may attempt to perform a 32-bit boot when it is actually configured for 16-bit boot
mode.
Workaround
Implement the recommendations described in AN273, item 7, “EP93xx Silicon Rev E Design Guidelines,”
which can be found at http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf.
NOTE: PLL2 is completely functional. This is only an issue with the USB clock divider logic.
5