Z86E3412SSG Zilog, Z86E3412SSG Datasheet - Page 44

• Manufacturer Part Number: Z86E3412SSG
• Description: IC MICROCONTROLLER 16K 28-SOIC
• Manufacturer: Zilog
• Series: Z8®r

Specifications of Z86E3412SSG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 12MHz
• Connectivity: EBI/EMI
• Peripherals: POR, WDT
• Number Of I /o: 24
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: OTP
• Ram Size: 237 x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 28-SOIC (7.5mm Width)
• Processor Series: Z86E3xx
• Core: Z8
• Data Bus Width: 8 bit
• Data Ram Size: 237 B
• Maximum Clock Frequency: 12 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 2
• Operating Supply Voltage: 3.5 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: Z86E4400ZDV, Z86E4400ZDP, Z86E4400ZDF, Z86E3400ZDV, Z86E3400ZDS, Z86E3400ZDP
• Minimum Operating Temperature: 0 C
• For Use With: 309-1073 - ADAPTER 28-SOIC TO 28-SOIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4701-5; Z86E3412SSG

PS022901-0508
OEN
Out
In
Open-Drain
Port 1 (P17-P10). Port 1 is an 8-bit, bidirectional, CMOS-compatible port with multi-
plexed Address (A7-A0) and Data (D7-D0) ports. These eight I/O lines can be pro-
grammed as inputs or outputs or can be configured under software control as an Address/
Data port for interfacing external memory. The input buffers are Schmitt-triggered and the
output buffers can be globally programmed as either push-pull or open-drain. Low EMI
output buffers can be globally programmed by the software. Port 1 can be placed under
handshake control. In this configuration, Port 3, lines P33 and P34 are used as the hand-
shake controls RDY1 and DAV1 (Ready and Data Available). To interface external mem-
ory, Port 1 must be programmed for the multiplexed Address/Data mode. If more than 256
external locations are required, Port 0 outputs the additional lines (see
1.5
MCU
2.3 Hysteresis V
Figure 18. Port 0 Configuration
4
4
CC
R ~ ~ 500 KΩ
@ V
Handshake Controls
DAV0 and RDY0
(P32 and P35)
Port 0 (I/O)
CC
= 5.0V
CMOS Z8
®
Product Specification
Auto Latch
OTP Microcontrollers
Electrical Characteristics
Figure
PAD
19).
40