R5S77632AY266BGV Renesas Electronics America, R5S77632AY266BGV Datasheet - Page 21

• Manufacturer Part Number: R5S77632AY266BGV
• Description: MPU 64K MEMORY 266MHZ 449-BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7780r

Specifications of R5S77632AY266BGV

• Core Processor: SH-4A
• Core Size: 32-Bit
• Speed: 266MHz
• Connectivity: Audio Codec, I²C, MMC, SCI, SIM, SIO, SSI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 107
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.15 V ~ 1.35 V
• Data Converters: A/D 4x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 449-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

P0K572630D001BR
Equipped with hardware required
to evaluate the SH7263 USB,
LCDC, SSI and other functions of
the SH7263. Standard
embedding of USB interface,
LCD module interface, audio
interface, and other advantages
and is suitable for advanced
development of USB application products such as digital audio
devices. In addition, all I/O ports of SH7263 are connected to the
expansion connectors, enabling simple evaluation of peripheral
functions and H/W expansion.
SH7721 Solution Engine Light
SH7727 Solution Engine Light
Evaluation board embedded with
the H/W for evaluating built-in
USB, LCDC, SIOF and other
functions of SH7720 and SH7727.
The environment where main OS
such as μITRON and the on-chip
debugger connection run is ready.
Connection with various USB
ASSP utility boards (*1) is possible
through relay board M3A-ZA53. It is also possible to use it as an easy
program evaluation board in combination with a simple monitor program.
This board is a product of Hitachi ULSI Systems Co., Ltd.
*
HSB8S2215RST <H8S/2215 Group Evaluation Board>
HSB8S2215ST <H8S/2215 Group Evaluation Board>
HSB8S2218ST <H8S/2218 Group Evaluation Board>
HSB8S2212ST <H8S/2212 Group Evaluation Board>
These boards contain the
H8S/2215, H8S/2218 and
H8S/2212 group, and it is
possible to use them as an easy
program evaluation board in
combination with a monitor
program. Emulator connection is
possible and the flash chip is
loadable. In addition, the USB starter's kit is also available as an
evaluation kit.
M3A-8K02 <38K0 Group/38K2 Group Evaluation, Development Board>
Evaluation/development board for the
38K0 Group and 38K2 Group.
Embedded with circuits needed for
USB function and USB hub,
application of the external circuit use
universal board (G04) facilitates simple
development and evaluation of USB
systems. Replacing the two-board set
upper surface boards (G02, G03) makes it possible to conduct inspections with
both flash-chips and debuggers. Since it is possible to exchange Vcc = 5V/
3.3 V, and USB rewriting/serial rewriting of flash memory with an easy
switch, changes in peripheral setup can be performed in a short time.
Demo Board/Evaluation Board
Demo Board/Evaluation Board
1: Option : M3A-0032， M3A-0037G01， M3A-0038G01， M3A-0039， M3A-0040
＜SH7263 Evaluation Board＞
SH7722 Solution Engine
Evaluation board embedded with
the H/W for evaluating the
H.264/MPEG4 dynamic picture
image, camera, USB, LCDC, SD
Card, and other functions of
SH7722. An environment where
a main OS, such as a μITRON or
WindowsCE, can function and
the on-chip debugger can connect as ready.
It is also possible to use this as an easy program evaluation board in
combination with a simple monitoring program. This board is a
product of Hitachi ULSI Systems Co., Ltd.
HSB8SX1653F, HSB8SX1654F <H8SX/1653 Group Evaluation Board>
HSB8SX1663F, HSB8SX1664F <H8SX/1663 Group Evaluation Board>
Evaluation board for CPUs
equipped with the H8SX/1653 or
1663 Groups. Application as a
program evaluation board by
connecting a full emulator or an
on-chip emulator. This board is a
product of Hokuto Denshi Co.,
Ltd.
M3A-0245 <M16C/24 Group M30245 Evaluation Board>
Equipped with hardware required to
evaluate USB and other peripherals
functions of M30245. Loading of
emulator connection or a flash-chip
is possible. The board M3A-7754*
for pitch conversion board can be
connected and program rewriting of
a flash-chip is easy. Moreover, since
the connector which can be used to expand the universal board etc. is
supported, the functional evaluation according to the use is possible. It can
be used as an easy program evaluation board in combination with a simple
monitor program. *
1: Option
1
Full-Speed MCU
Hi-Speed MCU
A utility board embedded with the
H/W required for M66291GP and
USB communication. Two PCB
connectors (13-pin x 2-line) are
prepared for microprocessor
connection. This connector is
compatible with other Renesas
USB ASSP utility boards, and is
easily connectable to systems using Renesas USB ASSP. This
comes equipped with a 12-MHz quartz-crystal oscillator, USB
connector, test pin, and jumper SW for bus mode selection
(expansion function of the M66291GP).
A utility board embedded with the
H/W required for M66592FP and
USB communication, and
including controlled D+/D- line
impedance matching. Features
two built-in PCB connectors (25-
pin x 2-line) for MCU board and
split bus connections. These
connectors are compatible with other Renesas USB ASSP utility
boards, and easily connectable to systems using Renesas USB ASSP.
This comes equipped with a 24-MHz quartz-crystal oscillator, USB
connector, test pin, and jumper SW for interface power supply change.
A utility board embedded with the
H/W required for R8A66597FP and
USB communication and including
controlled D+/D- line impedance
matching. Features two built-in
PCB connectors (25-pin x 2-line)
for MCU board and split bus
connections. These connectors are
compatible with other Renesas USB ASSP utility boards, and are easily
connectable to systems using Renesas USB ASSP. This comes
equipped with a 24-MHz quartz-crystal oscillator, USB connector, test
pin, and jumper SW for interface power supply change.
CPU board with a simple
debugger embedded with
M16C/80. By combining it with
various USB ASSP utility boards
(*1), all Renesas USB ASSP can
easily be evaluated. It comes
equipped with M16C/80, 10
MHz, a RS-232C driver, and
interface connector for PC.
*1. Option:M3A-0037G01， M3A-0038G01， M3A-0039， M3A-0040
M3A-0032<M66291GP Utility Board>
M3A-0038G01<M66592FP Utility Board>
M3A-0040<R8A66597FP Utility Board>
M3A-0033<Renesas USB ASSP Evaluation Motherboard>
Demo Board / Evaluation Board
Demo Board / Evaluation Board
Bundle:M3A-0032
M3A-0037G01<M66591GP Utility Board>
A Utility board equipped with the
H/W required for M66591GP and
USB communication, and
including controlled D+/D- line
impedance matching. Features
two built-in PCB connectors (25-
pin x 2-line) for MCU board and
split bus connections. These
connectors are compatible with other Renesas USB ASSP utility
boards, and easily connectable to systems using Renesas USB ASSP.
This comes equipped with a 24-MHz quartz-crystal oscillator, USB
connector, test pin, and jumper SW for interface power supply change.
M3A-0039<M66596FP Utility Board>
A utility board embedded with the
H/W required for M66596FP and
USB communication, and including
controlled D+/D- line impedance
matching. Features two built-in
PCB connectors (25-pin x 2-line)
for MCU board and split bus
connections. These connectors are
compatible with other Renesas USB ASSP utility boards, and are easily
connectable to systems using Renesas USB ASSP. This comes
equipped with a 24-MHz quartz-crystal oscillator, USB connector, test
pin, and jumper SW for interface power supply change.
M3A-ZA53<for SuperH Solution Engine>
Converter Board for USB ASSP Utility Board
Relay board for evaluating
Renesas USB ASSP from the
SuperH Solution Engine
various USB ASSP utility boards
(*1). It can be used in combination
with the processor system Solution
Engine
ASSP utility boards.
*1. Option: M3A-0032, M3A-0037G01, M3A-0038G01, M3A-0039, M3A-0040
*2. Option: SH7727, SH7721
TM
(*2) and various USB
TM
Full-Speed/Hi-Speed USB ASSP
using
USB ASSP Evaluation Tool
(An instance)