ATTINY4-TS8R Atmel, ATTINY4-TS8R Datasheet - Page 160

• Manufacturer Part Number: ATTINY4-TS8R
• Description: IC MCU AVR 512B FLASH SOT-23-6
• Manufacturer: Atmel
• Series: AVR® ATtinyr

Specifications of ATTINY4-TS8R

• Package / Case: SOT-23-6
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Speed: 12MHz
• Number Of I /o: 4
• Core Processor: AVR
• Program Memory Type: FLASH
• Ram Size: 32 x 8
• Program Memory Size: 512B (512 x 8)
• Oscillator Type: Internal
• Peripherals: POR, PWM, WDT
• Core Size: 8-Bit
• Processor Series: ATTINY4x
• Core: AVR8
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

22. Errata
22.1
22.1.1
22.1.2
22.1.3
22.2
22.2.1
160
ATtiny4
ATtiny5
ATtiny4/5/9/10
Rev. E
Rev. D
Rev. A – C
Rev. E
The revision letters in this section refer to the revision of the corresponding ATtiny4/5/9/10
device.
•
1. Programming Lock Bits
•
•
1. ESD HBM (ESD STM 5.1) level ±1000V
2. Programming Lock Bits
Not sampled.
•
1. Programming Lock Bits
Programming Lock Bits
ESD HBM (ESD STM 5.1) level ±1000V
Programming Lock Bits
Programming Lock Bits
Programming Lock Bits to a lock mode equal or lower than the current causes one word of
Flash to be corrupted. The location of the corruption is random.
Problem Fix / Workaround
When programming Lock Bits, make sure lock mode is not set to present, or lower levels.
The device meets ESD HBM (ESD STM 5.1) level ±1000V.
Problem Fix / Workaround
Always use proper ESD protection measures (Class 1C) when handling integrated circuits
before and during assembly.
Programming Lock Bits to a lock mode equal or lower than the current causes one word of
Flash to be corrupted. The location of the corruption is random.
Problem Fix / Workaround
When programming Lock Bits, make sure lock mode is not set to present, or lower levels.
Programming Lock Bits to a lock mode equal or lower than the current causes one word of
Flash to be corrupted. The location of the corruption is random.
Problem Fix / Workaround
When programming Lock Bits, make sure lock mode is not set to present, or lower levels.
8127D–AVR–02/10