PIC12CE519-04I/SN Microchip Technology, PIC12CE519-04I/SN Datasheet - Page 327

• Manufacturer Part Number: PIC12CE519-04I/SN
• Description: IC MCU OTP 1KX12 W/EE 8SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12CE519-04I/SN

• Program Memory Type: OTP
• Program Memory Size: 1.5KB (1K x 12)
• Package / Case: 8-SOIC (3.9mm Width)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Eeprom Size: 16 x 8
• Ram Size: 41 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC12C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 41 B
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 1
• Operating Supply Voltage: 3 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 309-1046 - ADAPTER 8-SOIC TO 8-DIP309-1045 - ADAPTER 8-SOIC TO 8-DIP
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Figure 17-35: Bus Collision During Start Condition (SDA only)
Figure 17-36: Bus Collision During Start Condition (SCL = 0)
1997 Microchip Technology Inc.
SDA
SCL
SEN
S
BCLIF
SSPIF
SDA
SCL
SEN
S
BCLIF
SSPIF
'0'
'0'
SCL = 0 before BRG time out,
Bus collision occurs, Set BCLIF.
Set SEN, enable start
sequence if SDA = 1, SCL = 1
condition if SDA = 1, SCL=1
Set SEN, enable start
SDA sampled low before
START condition.
S bit and SSPIF set because
SDA = 0, SCL = 1
. Set BCLIF,
SDA goes low before the SEN bit is set.
S bit and SSPIF set because
SDA = 0, SCL = 1
SDA = 0, SCL = 1
Set BCLIF.
T
BRG
Preliminary
T
BRG
SSPIF and BCLIF are
cleared in software.
SEN cleared automatically because of bus collision.
SSP module reset into idle state.
SCL = 0 before SDA = 0,
Bus collision occurs, Set BCLIF.
Section 17. MSSP
SSPIF and BCLIF are
cleared in software.
Interrupts cleared
in software.
'0'
'0'
DS31017A-page 17-51
17