PIC12LC672-04/SM Microchip Technology, PIC12LC672-04/SM Datasheet - Page 50

• Manufacturer Part Number: PIC12LC672-04/SM
• Description: IC MCU OTP 2KX14 LV A/D 8-SOIJ
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12LC672-04/SM

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• Processor Series: PIC12LC
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 8
• Operating Supply Voltage: 2.5 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: 0 C
• On-chip Adc: 8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details
• Other names: Q732363

PIC12C67X
8.4
Example 8-2 shows how to perform an A/D conversion.
The GPIO pins are configured as analog inputs. The
analog reference (V
interrupt is enabled and the A/D conversion clock is
F
EXAMPLE 8-2:
;
;
;
;
DS30561B-page 50
RC
Note:
Ensure that the required sampling time for the selected input channel has elapsed.
Then the conversion may be started.
. The conversion is performed on the GP0 channel.
BSF
CLRF
BSF
BCF
MOVLW
MOVWF
BCF
BSF
BSF
BSF
:
:
A/D Conversions
The GO/DONE bit should NOT be set in
the same instruction that turns on the A/D.
STATUS, RP0
ADCON1
PIE1,
STATUS, RP0
0xC1
ADCON0
PIR1,
INTCON, PEIE
INTCON, GIE
ADCON0, GO
REF
DOING AN A/D CONVERSION
) is the device V
ADIE
ADIF
; Select Page 1
; Configure A/D inputs
; Enable A/D interrupts
; Select Page 0
; RC Clock, A/D is on, Channel 0 is selected
;
; Clear A/D interrupt flag bit
; Enable peripheral interrupts
; Enable all interrupts
; Start A/D Conversion
; The ADIF bit will be set and the GO/DONE bit
;
DD
is cleared upon completion of the A/D Conversion.
. The A/D
Clearing the GO/DONE bit during a conversion will
abort the current conversion. The ADRES register will
NOT be updated with the partially completed A/D con-
version sample. That is, the ADRES register will con-
tinue to contain the value of the last completed
conversion (or the last value written to the ADRES reg-
ister). After the A/D conversion is aborted, a 2T
is required before the next acquisition is started. After
this 2T
the selected channel.
AD
wait, an acquisition is automatically started on
1999 Microchip Technology Inc.
AD
wait