PIC16C712-04/SS Microchip Technology, PIC16C712-04/SS Datasheet - Page 35

• Manufacturer Part Number: PIC16C712-04/SS
• Description: IC MCU OTP 1KX14 A/D PWM 20SSOP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C712-04/SS

• Core Size: 8-Bit
• Program Memory Size: 1.75KB (1K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 4MHz
• Number Of I /o: 13
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 20-SSOP
• Controller Family/series: PIC16C
• No. Of I/o's: 13
• Ram Memory Size: 128Byte
• Cpu Speed: 4MHz
• No. Of Timers: 3
• Processor Series: PIC16C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 13
• Number Of Timers: 3 bit
• Operating Supply Voltage: 2.5 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: 0 C
• On-chip Adc: 4 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 309-1016 - ADAPTER 20-SSOP TO 18-DIP
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

TABLE 5-1:
© 2005 Microchip Technology Inc.
Off
Timer
Counter External circuit
Module
TMR1
Mode
N/A
F
Firmware
Timer1 oscillator T1CON = --xx 1x11
Clock Source
OSC
/4
TMR1 MODULE AND PORTB OPERATION
T1CON = --xx 0x00
T1CON = --xx 0x01
T1CON = --xx 0x11
TR1SCCP = ---- -x-1
T1CON = --xx 0x11
TR1SCCP = ---- -x-0
Control Bits
Off
TMR1 module uses the main
oscillator as clock source.
TMR1ON can turn on or turn off
Timer1.
TMR1 module uses the external
signal on the RB1/T1OSO/
T1CKI pin as a clock source.
TMR1ON can turn on or turn off
Timer1. DT1CK can read the
signal on the RB1/T1OSO/
T1CKI pin.
DATACCP<0> bit drives RB1/
T1OSO/T1CKI and produces
the TMR1 clock source.
TMR1ON can turn on or turn off
Timer1. The DATACCP<0> bit,
DT1CK, can read and write to
the RB1/T1OSO/T1CKI pin.
RB1/T1OSO/T1CKI and RB2/
T1OSI are configured as a 2 pin
crystal oscillator. RB1/T1OSI/
T1CKI is the clock input for
TMR1. TMR1ON can turn on or
turn off Timer1. DATACCP<1>
bit, DT1CK, always reads ‘0’ as
input and can not write to the
RB1/T1OSO/T1CK1 pin.
TMR1 Module Operation
PIC16C712/716
PORTB<2:1> function as normal
I/O
PORTB<2:1> function as normal
I/O
PORTB<2> functions as normal
I/O. PORTB<1> always reads ‘0’
when configured as input. If
PORTB<1> is configured as out-
put, reading PORTB<1> will
read the data latch. Writing to
PORTB<1> will always store the
result in the data latch, but not to
the RB1/T1OSO/T1CKI pin. If
the TMR1CS bit is cleared
(TMR1 reverts to the timer
mode), then pin PORTB<1> will
be driven with the value in the
data latch.
PORTB<2:1> always read ‘0’
when configured as inputs. If
PORTB<2:1> are configured as
outputs, reading PORTB<2:1>
will read the data latches. Writ-
ing to PORTB<2:1> will always
store the result in the data
latches, but not to the RB2/
T1OSI and RB1/T1OSO/T1CKI
pins. If the TMR1CS and
T1OSCEN bits are cleared
(TMR1 reverts to the timer mode
and TMR1 oscillator is disabled),
then pin PORTB<2:1> will be
driven with the value in the data
latches.
PORTB<2:1> Operation
DS41106B-page 33