PIC16LF707-I/ML Microchip Technology, PIC16LF707-I/ML Datasheet - Page 123

• Manufacturer Part Number: PIC16LF707-I/ML
• Description: MCU 8BIT 14KB FLASH 5.5V 44QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16LF707-I/ML

• Core Size: 8-Bit
• Program Memory Size: 14KB (8K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 36
• Program Memory Type: FLASH
• Ram Size: 363 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 14x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFN
• Controller Family/series: PIC16LF
• No. Of I/o's: 36
• Ram Memory Size: 363Byte
• Cpu Speed: 20MHz
• No. Of Timers: 6
• Processor Series: PIC16LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 368 B
• Interface Type: I2C, SPI, AUSART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 4
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 14 Channel
• On-chip Dac: 5 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

16.7.3
The frequency threshold should be placed midway
between the value of nominal frequency and the
reduced frequency of the capacitive sensing oscillator.
Refer to Application Note AN1103, “Software Handling
for Capacitive Sensing” (DS01103) for more detailed
information on the software required for capacitive
sensing module.
 2010 Microchip Technology Inc.
Note:
• AN1102, “Layout and Physical
•
Sensing” (DS01101)
FREQUENCY THRESHOLD
For
capacitive sensing refer to Application
Notes:
Design Guidelines for Capacitive
Sensing” (DS01102).
AN1101, “Introduction to Capacitive
more
information
on
general
Preliminary
PIC16F707/PIC16LF707
16.8
The capacitive sensing oscillator will continue to run as
long as the module is enabled, independent of the part
being in Sleep. In order for the software to determine if
a frequency change has occurred, the part must be
awake. However, the part does not have to be awake
when the timer resource is acquiring counts.
Note:
Operation during Sleep
TimerA/B does not operate when in Sleep,
and
capacitive sense measurements in Sleep.
therefore
cannot
DS41418A-page 123
be
used
for