PIC18F25J50-I/SS Microchip Technology, PIC18F25J50-I/SS Datasheet - Page 11

• Manufacturer Part Number: PIC18F25J50-I/SS
• Description: IC PIC MCU FLASH 32K 2V 28-SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F25J50-I/SS

• Program Memory Type: FLASH
• Program Memory Size: 32KB (16K x 16)
• Package / Case: 28-SSOP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 16
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3776 B
• Interface Type: EUSART, I2C, SPI
• Maximum Clock Frequency: 48 MHz
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183022, DM183032, DV164136, MA180024
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel
• Package: 28SSOP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164322 - MODULE SOCKET MPLAB PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Microchip USB Device Firmware Framework User’s Guide
DS51679B-page 7
FIGURE 1-3:
1.2.4
The Framework is set up to automatically select the correct compile-time options for
the standard demo boards available from Microchip. In order to get the code to compile
and link correctly, there are still a few steps that may be required by the user.
To use these projects with other microcontrollers or circuit board platforms, the
following changes will be needed:
1. Open the MPLAB IDE project.
2. From the menu bar, select the microcontroller which will be used (Configure >
3. Replace the linker script in the project with the appropriate device-specific linker
Note:
Select Device).
script. These can be found in the \lkr directory inside the installation directory
for the C18 compiler or the \support\gld directory inside the installation
directory for the C30 compiler.
Selecting the Hardware Configuration
In some cases, the C18 compiler may fail to compile correctly, giving an
error that certain header files from the mcc18 library could not be found. In
this case, add the path <C18 Installation directory>\h after the
project root path in the Include Path field. This is often C:\mcc18.
CONFIGURING MPLAB
DEVICE FIRMWARE FRAMEWORK
®
IDE FOR THE MICROCHIP USB
© 2008 Microchip Technology Inc.