PIC18LF26J50-I/ML Microchip Technology, PIC18LF26J50-I/ML Datasheet - Page 176

• Manufacturer Part Number: PIC18LF26J50-I/ML
• Description: IC PIC MCU FLASH 64K 2V 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF26J50-I/ML

• Program Memory Type: FLASH
• Program Memory Size: 64KB (32K x 16)
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 16
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: EUSART, I2C, SPI
• Maximum Clock Frequency: 31 KHz
• Number Of Programmable I/os: 16
• Number Of Timers: 5
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183032, DV164136, MA180024, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel
• A/d Bit Size: 10 bit
• A/d Channels Available: 10
• Height: 0.88 mm
• Length: 6 mm
• Supply Voltage (max): 2.75 V, 3.6 V
• Supply Voltage (min): 2 V
• Width: 6 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC18F46J50 FAMILY
10.2.5.2
When chip select is active and a write strobe occurs
(PMCS = 1 and PMWR = 1), the data from PMD<7:0>
is captured into one of the four input buffer bytes.
Which byte is written depends on the 2-bit address
placed on ADDRL<1:0>.
Table 10-1 provides the corresponding input registers
and their associated address.
FIGURE 10-8:
DS39931C-page 176
PMD<7:0>
PMA<1:0>
PMWR
PMPIF
PMRD
PMCS
IBF
WRITE TO SLAVE PORT
PARALLEL SLAVE PORT WRITE WAVEFORMS
When an input buffer is written, the corresponding IBxF
bit is set. The IBF flag bit is set when all the buffers are
written. If any buffer is already written (IBxF = 1), the
next write strobe to that buffer will generate an OBUF
event and the byte will be discarded.
|
Q4
|
Q1
© 2009 Microchip Technology Inc.
|
Q2
|
Q3
|
Q4