PIC16LF73-I/SP Microchip Technology, PIC16LF73-I/SP Datasheet - Page 55
![IC PIC MCU FLASH 4KX14 28DIP](/photos/6/59/65908/150-28-dip_sml.jpg)
PIC16LF73-I/SP
Manufacturer Part Number
PIC16LF73-I/SP
Description
IC PIC MCU FLASH 4KX14 28DIP
Manufacturer
Microchip Technology
Series
PIC® 16Fr
Specifications of PIC16LF73-I/SP
Program Memory Type
FLASH
Program Memory Size
7KB (4K x 14)
Package / Case
28-DIP (0.300", 7.62mm)
Core Processor
PIC
Core Size
8-Bit
Speed
20MHz
Connectivity
I²C, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, POR, PWM, WDT
Number Of I /o
22
Ram Size
192 x 8
Voltage - Supply (vcc/vdd)
2 V ~ 5.5 V
Data Converters
A/D 5x8b
Oscillator Type
External
Operating Temperature
-40°C ~ 85°C
Processor Series
PIC16LF
Core
PIC
Data Bus Width
8 bit
Data Ram Size
192 B
Interface Type
I2C/SPI/USART
Maximum Clock Frequency
20 MHz
Number Of Programmable I/os
22
Number Of Timers
3
Operating Supply Voltage
2 V to 5.5 V
Maximum Operating Temperature
+ 85 C
Mounting Style
Through Hole
3rd Party Development Tools
52715-96, 52716-328, 52717-734
Development Tools By Supplier
ICE2000, DM163022
Minimum Operating Temperature
- 40 C
On-chip Adc
5-ch x 8-bit
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
PIC16LF73I/SP
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PIC16LF73-I/SP
Manufacturer:
MICROCHIP/微芯
Quantity:
20 000
8.0
Each Capture/Compare/PWM (CCP) module contains
a 16-bit register which can operate as a:
• 16-bit Capture register
• 16-bit Compare register
• PWM Master/Slave Duty Cycle register
Both the CCP1 and CCP2 modules are identical in
operation, with the exception being the operation of the
special event trigger. Table 8-1 and Table 8-2 show the
resources and interactions of the CCP module(s). In
the following sections, the operation of a CCP module
is described with respect to CCP1. CCP2 operates the
same as CCP1, except where noted.
8.1
Capture/Compare/PWM Register1 (CCPR1) is com-
prised of two 8-bit registers: CCPR1L (low byte) and
CCPR1H (high byte). The CCP1CON register controls
the operation of CCP1. The special event trigger is
generated by a compare match and will clear both
TMR1H and TMR1L registers.
TABLE 8-2:
2002 Microchip Technology Inc.
CCPx Mode CCPy Mode
Capture
Capture
Compare
PWM
PWM
PWM
CAPTURE/COMPARE/PWM
MODULES
CCP1 Module
Capture
Compare
Compare
PWM
Capture
Compare
INTERACTION OF TWO CCP MODULES
Same TMR1 time-base.
Same TMR1 time-base.
Same TMR1 time-base.
The PWMs will have the same frequency and update rate (TMR2 interrupt).
The rising edges are aligned.
None.
None.
8.2
Capture/Compare/PWM Register1 (CCPR1) is com-
prised of two 8-bit registers: CCPR1L (low byte) and
CCPR1H (high byte). The CCP2CON register controls
the operation of CCP2. The special event trigger is
generated by a compare match; it will clear both
TMR1H and TMR1L registers, and start an A/D conver-
sion (if the A/D module is enabled).
Additional information on CCP modules is available in
the PICmicro™ Mid-Range MCU Family Reference
Manual (DS33023) and in Application Note AN594,
“Using the CCP Modules” (DS00594).
TABLE 8-1:
Interaction
CCP Mode
CCP2 Module
Compare
Capture
PWM
CCP MODE - TIMER
RESOURCES REQUIRED
PIC16F7X
Timer Resource
DS30325B-page 53
Timer1
Timer1
Timer2