DSPIC33FJ64GS608-E/PT Microchip Technology, DSPIC33FJ64GS608-E/PT Datasheet - Page 238
DSPIC33FJ64GS608-E/PT
Manufacturer Part Number
DSPIC33FJ64GS608-E/PT
Description
MCU/DSP 16BIT 64KB FLASH 80TQFP
Manufacturer
Microchip Technology
Series
dsPIC™ 33Fr
Datasheet
1.DSPIC33FJ32GS406-IPT.pdf
(418 pages)
Specifications of DSPIC33FJ64GS608-E/PT
Program Memory Type
FLASH
Program Memory Size
64KB (64K x 8)
Package / Case
80-TFQFP
Core Processor
dsPIC
Core Size
16-Bit
Speed
40 MIPs
Connectivity
CAN, I²C, IrDA, LIN, SPI, UART/USART, USB
Peripherals
Brown-out Detect/Reset, DMA, QEI, POR, PWM, WDT
Number Of I /o
74
Ram Size
9K x 8
Voltage - Supply (vcc/vdd)
3 V ~ 3.6 V
Data Converters
A/D 18x10b, D/A 1x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 125°C
Product
DSCs
Data Bus Width
16 bit
Processor Series
DSPIC33F
Core
dsPIC
Numeric And Arithmetic Format
Fixed-Point or Floating-Point
Instruction Set Architecture
Harvard
Device Million Instructions Per Second
40 MIPs
Maximum Clock Frequency
120 MHz
Number Of Programmable I/os
74
Data Ram Size
4 KB
Operating Supply Voltage
3.3 V
Maximum Operating Temperature
+ 125 C
Mounting Style
SMD/SMT
3rd Party Development Tools
52713-733, 52714-737, 53276-922, EWDSPIC
Development Tools By Supplier
PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DV164033
Interface Type
I2C, SPI, UART
Minimum Operating Temperature
- 40 C
On-chip Adc
10 bit, 18 Channel
On-chip Dac
10 bit, 4 Channel
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
DSPIC33FJ64GS608-E/PT
Manufacturer:
Microchip Technology
Quantity:
10 000
Part Number:
DSPIC33FJ64GS608-E/PT
Manufacturer:
MIC
Quantity:
20 000
- Current page: 238 of 418
- Download datasheet (3Mb)
dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
REGISTER 16-11: PWMCONx: PWM CONTROL REGISTER (CONTINUED)
DS70591C-page 238
bit 8
bit 7-6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Note 1: Software must clear the interrupt status here, and in the corresponding IFS bit in the Interrupt Controller.
2: The Independent Time Base mode (ITB = 1) must be enabled to use Center-Aligned mode. If ITB = 0, the
3: These bits should not be changed after the PWM is enabled (PTEN = 1) (PTCON<15>).
4: For DTCP to be effective, DTC<1:0> must be set to ‘11’; otherwise, DTCP is ignored.
5: Center-Aligned mode ignores the least significant 3 bits of the duty cycle, phase, and dead time registers.
6: Configure CLMOD = 0 (FCLCONX<8>) and ITB = 1 (PWMCONx<9>) to operate in External Period Reset
CAM bit is ignored.
The highest Center-Aligned mode resolution available is 8.32 ns with the clock prescaler set to the fastest
clock.
mode.
MDCS: Master Duty Cycle Register Select bit
1 = MDC register provides duty cycle information for this PWM generator
0 = PDCx and SDCx registers provide duty cycle information for this PWM generator
DTC<1:0>: Dead Time Control bits
11 = Dead Time Compensation mode
10 = Dead time function is disabled
01 = Negative dead time actively applied for Complementary Output mode
00 = Positive dead time actively applied for all output modes
DTCP: Dead Time Compensation Polarity bit
1 = If DTCMPx = 0, PWMxL is shortened, and PWMxH is lengthened
0 = If DTCMPx = 0, PWMxH is shortened, and PWMLx is lengthened
Unimplemented: Read as ‘0’
MTBS: Master Time Base Select bit
1 = PWM generator uses the secondary master time base for synchronization and the clock source
0 = PWM generator uses the primary master time base for synchronization and the clock source for
CAM: Center-Aligned Mode Enable bit
1 = Center-Aligned mode is enabled
0 = Edge-Aligned mode is enabled
XPRES: External PWM Reset Control bit
1 = Current-limit source resets the time base for this PWM generator if it is in Independent Time Base
0 = External pins do not affect PWM time base
IUE: Immediate Update Enable bit
1 = Updates to the active MDC/PDCx/SDCx registers are immediate
0 = Updates to the active PDCx registers are synchronized to the PWM time base
mode
If DTCMPx = 1, PWMxH is shortened, and PWMxL is lengthened
If DTCMPx = 1, PWMxL is shortened, and PWMxH is lengthened
for the PWM generation logic (if secondary time base is available)
the PWM generation logic
Preliminary
(2,3,5)
(6)
(4)
(3)
2010 Microchip Technology Inc.
Related parts for DSPIC33FJ64GS608-E/PT
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
IC, DSC, 16BIT, 12KB, 40MHZ, 3.6V, DIP28
Manufacturer:
Microchip Technology
Datasheet:
Part Number:
Description:
Manufacturer:
Microchip Technology Inc.
Datasheet:
Part Number:
Description:
Manufacturer:
Microchip Technology Inc.
Datasheet:
Part Number:
Description:
Manufacturer:
Microchip Technology Inc.
Datasheet:
Part Number:
Description:
Manufacturer:
Microchip Technology Inc.
Datasheet:
Part Number:
Description:
Manufacturer:
Microchip Technology Inc.
Datasheet:
Part Number:
Description:
Manufacturer:
Microchip Technology Inc.
Datasheet:
Part Number:
Description:
Manufacturer:
Microchip Technology Inc.
Datasheet:
Part Number:
Description:
Manufacturer:
Microchip Technology Inc.
Datasheet: