AT89C51RB2-RLTUM Atmel, AT89C51RB2-RLTUM Datasheet - Page 25

• Manufacturer Part Number: AT89C51RB2-RLTUM
• Description: IC 8051 MCU FLASH 16K 44VQFP
• Manufacturer: Atmel
• Series: 89Cr

Specifications of AT89C51RB2-RLTUM

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 60MHz
• Connectivity: SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Cpu Family: 89C
• Device Core: 8051
• Device Core Size: 8b
• Frequency (max): 60MHz
• Interface Type: SPI/UART
• Total Internal Ram Size: 1.25KB
• # I/os (max): 32
• Number Of Timers - General Purpose: 3
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 2.7V
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 44
• Package Type: VQFP
• Package: 44VQFP
• Family Name: 89C
• Maximum Speed: 60 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Processor Series: AT89x
• Core: 8051
• Data Ram Size: 1.25 KB
• Maximum Clock Frequency: 60 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Minimum Operating Temperature: - 40 C
• For Use With: AT89OCD-01 - USB EMULATOR FOR AT8XC51 MCUAT89STK-11 - KIT STARTER FOR AT89C51RX2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Compliant

Registers
4180E–8051–10/06
Table 19. AUXR Register
AUXR - Auxiliary Register (8Eh)
Reset Value = XX0X 00’HSB. XRAM’0b (see Table 65)
Not bit addressable
Number
DPU
Bit
7
7
6
5
4
3
2
1
0
Mnemonic Description
EXTRAM
XRS1
XRS0
DPU
Bit
M0
AO
6
-
-
-
Disable Weak Pull-up
Cleared to activate the permanent weak pull up when latch data is logical 1
Set to disactive the weak pull-up (reduce power consumption)
Reserved
The value read from this bit is indeterminate. Do not set this bit.
Pulse Length
Cleared to stretch MOVX control: the RD and the WR pulse length is 6 clock
periods (default).
Set to stretch MOVX control: the RD and the WR pulse length is 30 clock
periods.
Reserved
The value read from this bit is indeterminate. Do not set this bit.
XRAM Size
EXTRAM Bit
Cleared to access internal XRAM using movx @ Ri/ @ DPTR.
Set to access external memory.
Programmed by hardware after Power-up regarding Hardware Security Byte
(HSB), default setting, XRAM selected.
ALE Output Bit
Cleared, ALE is emitted at a constant rate of 1/6 the oscillator frequency (or 1/3 if
X2 mode is used). (default) Set, ALE is active only during a MOVX or MOVC
instruction is used.
XRS1 XRS0 XRAM size
0
0
1
1
M0
5
0
1
0
1
256 Bytes (default)
512 Bytes
768 Bytes
1024 Bytes
4
-
XRS1
3
AT89C51RB2/RC2
XRS0
2
EXTRAM
1
AO
0
25