PIC24FJ128GB206-I/PT Microchip Technology, PIC24FJ128GB206-I/PT Datasheet - Page 137

• Manufacturer Part Number: PIC24FJ128GB206-I/PT
• Description: MCU PIC 16BIT FLASH USB 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ128GB206-I/PT

• Core Size: 16-Bit
• Program Memory Size: 128KB (43K x 24)
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Type: FLASH
• Ram Size: 96K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Controller Family/series: PIC24
• No. Of I/o's: 52
• Ram Memory Size: 96KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Interface: I2C, SPI, UART, USB
• Embedded Interface Type: I2C, SPI, UART, USB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

8.0
The oscillator system for PIC24FJ256GB210 family
devices has the following features:
• A total of four external and internal oscillator options
FIGURE 8-1:
 2010 Microchip Technology Inc.
SOSCO
Note:
as clock sources, providing 11 different clock modes
SOSCI
OSCO
OSCI
OSCILLATOR
CONFIGURATION
This data sheet summarizes the features
of this group of PIC24F devices. It is not
intended to be a comprehensive reference
source. For more information, refer to the
“PIC24F
Section 6. “Oscillator” (DS39700). The
information in this data sheet supersedes
the information in the FRM.
Primary Oscillator
Secondary Oscillator
Oscillator
Oscillator
LPRC
FRC
Family
PIC24FJ256GB210 FAMILY CLOCK DIAGRAM
SOSCEN
Enable
Oscillator
(nominal)
31 kHz (nominal)
8 MHz
Reference
USB PLL
PLLDIV<2:0>
Manual”,
CLKDIV<10:8>
PIC24FJ256GB210 FAMILY
PLL
DIV
&
PIC24FJ256GB210 Family
CPDIV<1:0>
8 MHz
4 MHz
• An on-chip PLL block to boost internal operating
• Software controllable switching between various
• Software controllable postscaler for selective
• A Fail-Safe Clock Monitor (FSCM) that detects
• A separate and independently configurable system
A simplified diagram of the oscillator system is shown
in Figure 8-1.
ECPLL,FRCPLL
XTPLL, HSPLL
frequency on select internal and external oscillator
sources, and to provide a precise clock source for
peripherals, such as USB
clock sources
clocking of CPU for system power savings
clock failure and permits safe application recovery
or shutdown
clock output for synchronizing external hardware
XT, HS, EC
FRCDIV
SOSC
LPRC
FRC
Clock Control Logic
Fail-Safe
Monitor
Clock
CLKDIV<14:12>
Reference Clock
WDT, PWRT
Clock Source Option
for Other Modules
REFOCON<15:8>
Generator
48 MHz USB Clock
DS39975A-page 137
Peripherals
REFO
CLKO
CPU