PIC24FJ256GB108-I/PT Microchip Technology, PIC24FJ256GB108-I/PT Datasheet - Page 209

• Manufacturer Part Number: PIC24FJ256GB108-I/PT
• Description: IC PIC MCU FLASH 256K 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ256GB108-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 256KB (85.5K x 24)
• Package / Case: 80-TFQFP
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 65
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 68
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DM240011
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDDM240011 - KIT STARTER MPLAB FOR PIC24F MCUMA240014 - MODULE PLUG-IN PIC24
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

18.1
18.1.1
18.1.1.1
PIC24FJ256GB110 family devices have a built-in
1.5 k resistor on the D+ line that is available when the
microcontroller in operating in device mode. This is
used to signal an external Host that the device is
operating in Full Speed Device mode. It is engaged by
setting the DPPULUP bit (U1OTGCON<7>).
Alternatively, an external resistor may be used on D+,
as shown in Figure 18-2.
FIGURE 18-2:
18.1.1.2
Many USB applications will likely have several different
sets of power requirements and configuration. The
most common power modes encountered are:
• Bus Power Only,
• Self-Power Only and
• Dual Power with Self-Power Dominance.
Bus Power Only mode (Figure 18-3) is effectively the
simplest method. All power for the application is drawn
from the USB.
To meet the inrush current requirements of the USB 2.0
Specification, the total effective capacitance appearing
across V
In the USB Suspend mode, devices must consume no
more than 2.5 mA from the 5V V
cable. During the USB Suspend mode, the D+ or D-
pull-up resistor must remain active, which will consume
some of the allowed suspend current.
In Self-Power Only mode (Figure 18-4), the USB
application provides its own power, with very little
power being pulled from the USB. Note that an attach
indication is added to indicate when the USB has been
connected and the host is actively powering V
 2009 Microchip Technology Inc.
PIC
BUS
Hardware Configuration
®
DEVICE MODE
MCU
and ground must be no more than 10 F.
D+ Pull-up Resistor
Power Modes
V
USB
D+
D-
EXTERNAL PULL-UP FOR
FULL-SPEED DEVICE
MODE
1.5 k
BUS
Controller/HUB
line of the USB
Host
BUS
PIC24FJ256GB110 FAMILY
.
To meet compliance specifications, the USB module
(and the D+ or D- pull-up resistor) should not be enabled
until the host actively drives V
tolerant I/O pins may be used for this purpose.
The application should never source any current onto
the 5V V
The Dual-power option with Self-Power Dominance
(Figure 18-5) allows the application to use internal
power primarily, but switch to power from the USB
when no internal power is available. Dual-power
devices must also meet all of the special requirements
for inrush current and Suspend mode current previ-
ously described, and must not enable the USB module
until V
FIGURE 18-3:
FIGURE 18-4:
FIGURE 18-5:
V
V
~3.3V
V
V
~5V
~3.3V
BUS
~5V
SELF
BUS
SELF
V
~5V
BUS
100 k
BUS
BUS
Regulator
Low I
Low I
is driven high.
100 k
pin of the USB cable.
Q
Q
Regulator
100 k
3.3V
100 k
100 k
3.3V
BUS POWER ONLY
SELF-POWER ONLY
DUAL POWER EXAMPLE
Attach Sense
BUS
Attach Sense
Attach Sense
high. One of the 5.5V
DS39897C-page 209
V
V
V
V
BUS
DD
USB
SS
V
V
V
V
V
V
V
V
BUS
DD
USB
SS
BUS
DD
USB
SS