DSPIC30F6011A-30I/PF Microchip Technology, DSPIC30F6011A-30I/PF Datasheet

IC DSPIC MCU/DSP 132K 64TQFP

DSPIC30F6011A-30I/PF

Manufacturer Part Number
DSPIC30F6011A-30I/PF
Description
IC DSPIC MCU/DSP 132K 64TQFP
Manufacturer
Microchip Technology
Series
dsPIC™ 30Fr

Specifications of DSPIC30F6011A-30I/PF

Core Processor
dsPIC
Core Size
16-Bit
Speed
30 MIPs
Connectivity
CAN, I²C, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, LVD, POR, PWM, WDT
Number Of I /o
52
Program Memory Size
132KB (44K x 24)
Program Memory Type
FLASH
Eeprom Size
2K x 8
Ram Size
6K x 8
Voltage - Supply (vcc/vdd)
2.5 V ~ 5.5 V
Data Converters
A/D 16x12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
64-TQFP, 64-VQFP
Core Frequency
40MHz
Core Supply Voltage
5.5V
Embedded Interface Type
CAN, I2C, SPI, UART
No. Of I/o's
52
Flash Memory Size
132KB
Supply Voltage Range
2.5V To 5.5V
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
XLT64PT4 - SOCKET TRAN ICE 64MQFP/TQFPAC164313 - MODULE SKT FOR PM3 64PFAC30F002 - MODULE SOCKET DSPIC30F 64TQFPDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
DSPIC30F6011A-30I/PF
Manufacturer:
MICROCHIP
Quantity:
966
Part Number:
DSPIC30F6011A-30I/PF
Manufacturer:
MICROCHIP
Quantity:
316
Part Number:
DSPIC30F6011A-30I/PF
Manufacturer:
Microchip Technology
Quantity:
10 000
The dsPIC30F6011A/6012A/6013A/6014A (Rev. B1)
samples that you have received were found to conform
to the specifications and functionality described in the
following documents:
• DS70157 – “dsPIC30F/33F Programmer’s
• DS70143 –
• DS70046 – “dsPIC30F Family Reference Manual”
The exceptions to the specifications in the documents
listed above are described in this section. The specific
devices for which these exceptions are described are
listed below:
• dsPIC30F6011A
• dsPIC30F6012A
• dsPIC30F6013A
• dsPIC30F6014A
dsPIC30F601XA Rev. B1 silicon is identified by
performing a “Reset and Connect” operation to the
device using MPLAB
The following text is then visible under the MPLAB ICD 2
section in the output window within MPLAB IDE:
MPLAB ICD 2 Ready
Connecting to MPLAB ICD 2
...Connected
Setting Vdd source to target
Target Device dsPIC30F6014A found,
revision = Rev 0x1041
...Reading ICD Product ID
Running ICD Self Test
...Passed
MPLAB ICD 2 Ready
The errata described in this section will be addressed
in
dsPIC30F6012A,
dsPIC30F6014A silicon.
© 2008 Microchip Technology Inc.
dsPIC30F6011A/6012A/6013A/6014A Rev. B1 Silicon Errata
Reference Manual”
“dsPIC30F6011A/6012A/6013A/6014A Data
Sheet”
future
revisions
®
ICD 2 within the MPLAB IDE.
dsPIC30F6013A
of
dsPIC30F6011A,
and
6012A/6013A/6014A
Silicon Errata Summary
The following list summarizes the errata described in
further detail through the remainder of this document:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Decimal Adjust Instruction
The Decimal Adjust instruction, DAW.b, may
improperly clear the Carry bit, C (SR<0>).
Output Compare Module in PWM Mode
Output compare will produce a glitch when loading
0% duty cycle in PWM mode. It will also miss the
next compare after the glitch.
I
The I
operating as an I
I/O Port – Port Pin Multiplexed with IC1
The Port I/O pin multiplexed with the Input Capture
1 (IC1) function cannot be used as a digital input
pin when the UART auto-baud feature is enabled.
I
When the I
addressing using the same address bits (A10 and
A9) as other I
not work as expected.
I
The 10-bit slave does not set the RBF flag or load
the I2CxRCV register, on address match if the
least significant bits of the address are the same
as the 7-bit reserved addresses.
I
When the I
slave with an address of 0x102, the I2CxRCV
register content for the lower address byte is 0x01
rather than 0x02.
I
When the I
device generates a glitch on the SDA and SCL
pins, causing a false communication start in a
single-master configuration or a bus collision in a
multi-master configuration.
Timer Module
Clock switching prevents the device from waking
up from Sleep.
2
2
2
2
2
C™ Module
C Module: 10-bit Addressing Mode
C Module: 10-bit Addressing Mode
C Module: 10-bit Addressing Mode
C Module
dsPIC30F6011A/
2
C module loses incoming data bytes when
2
2
C module is enabled, the dsPIC
2
C module is configured as a 10-bit
C module is configured for 10-bit
2
C devices, the A10 and A9 bits may
2
C slave.
DS80401A-page 1
®
DSC

Related parts for DSPIC30F6011A-30I/PF

DSPIC30F6011A-30I/PF Summary of contents

Page 1

... Rev. B1 Silicon Errata The dsPIC30F6011A/6012A/6013A/6014A (Rev. B1) samples that you have received were found to conform to the specifications and functionality described in the following documents: • DS70157 – “dsPIC30F/33F Programmer’s Reference Manual” • DS70143 – “dsPIC30F6011A/6012A/6013A/6014A Data Sheet” • DS70046 – “dsPIC30F Family Reference Manual” ...

Page 2

... PLL Lock Status Bit The PLL LOCK Status bit (OSCCON<5>) can occasionally get cleared and generate an oscillator failure trap even when the PLL is still locked and functioning correctly. 11. PSV Operations An address error trap occurs in certain addressing modes when accessing the first four bytes of any PSV page ...

Page 3

... Module When the I C module is configured as a slave, either in single-master or multi-master mode, the receiver buffer is filled whether a valid slave address is detected or not. Therefore receiver overflow condition occurs and this condition is indicated by the I2COV flag in the I2CSTAT register. This overflow condition inhibits the ability to set the ...

Page 4

... Module there are two I C devices on the bus, one of them is acting as the Master receiver and the other as the Slave transmitter. If both devices are config- ured for 10-bit addressing mode, and have the same value in the A10 and A9 bits of their ...

Page 5

... Module: Timer When the timer is being operated in Asynchronous mode using the secondary oscillator (32.768 kHz) and the device is put into Sleep mode, a clock switch to any other oscillator mode before putting the device to Sleep prevents the timer from waking the device from Sleep. ...

Page 6

... APPENDIX A: REVISION HISTORY Revision A (9/2008) Initial version of this document. DS80401A-page 6 © 2008 Microchip Technology Inc. ...

Page 7

... PowerMate, PowerTool, REAL ICE, rfLAB, Select Mode, Total Endurance, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. ...

Page 8

... Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-572-9526 Fax: 886-3-572-6459 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-536-4803 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 © 2008 Microchip Technology Inc. 01/02/08 ...

Related keywords