PIC17C42A/JW Microchip Technology, PIC17C42A/JW Datasheet - Page 37

• Manufacturer Part Number: PIC17C42A/JW
• Description: IC MCU EPROM 2KX16 PWM 40CDIP
• Manufacturer: Microchip Technology
• Series: PIC® 17Cr

Specifications of PIC17C42A/JW

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 33MHz
• Connectivity: UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Size: 4KB (2K x 16)
• Program Memory Type: EPROM, UV
• Ram Size: 232 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 6 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 40-CDIP (0.600", 15.24mm) Window
• For Use With: DVA17XP401 - DEVICE ADAPTER FOR PIC17C42AAC174001 - MODULE SKT PROMATEII 40DIP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -

6.2.2.2
The CPUSTA register contains the status and control
bits for the CPU. This register is used to globally
enable/disable interrupts. If only a specific interrupt is
desired to be enabled/disabled, please refer to the
INTerrupt STAtus (INTSTA) register and the Peripheral
Interrupt Enable (PIE) register. This register also indi-
cates if the stack is available and contains the
Power-down (PD) and Time-out (TO) bits. The TO, PD,
and STKAV bits are not writable. These bits are set and
cleared according to device logic. Therefore, the result
of an instruction with the CPUSTA register as destina-
tion may be different than intended.
FIGURE 6-8:
1996 Microchip Technology Inc.
bit7
bit 7-6: Unimplemented: Read as '0'
bit 5:
bit 4:
bit 3:
bit 2:
bit 1-0: Unimplemented: Read as '0'
U - 0
—
CPU STATUS REGISTER (CPUSTA)
STKAV: Stack Available bit
This bit indicates that the 4-bit stack pointer value is Fh, or has rolled over from Fh
1 = Stack is available
0 = Stack is full, or a stack overflow may have occurred (Once this bit has been cleared by a
GLINTD: Global Interrupt Disable bit
This bit disables all interrupts. When enabling interrupts, only the sources with their enable bits set can
cause an interrupt.
1 = Disable all interrupts
0 = Enables all un-masked interrupts
TO: WDT Time-out Status bit
1 = After power-up or by a CLRWDT instruction
0 = A Watchdog Timer time-out occurred
PD: Power-down Status bit
1 = After power-up or by the CLRWDT instruction
0 = By execution of the SLEEP instruction
U - 0
stack overflow, only a device reset will set this bit)
—
CPUSTA REGISTER (ADDRESS: 06h, UNBANKED)
STKAV GLINTD
R - 1
R/W - 1
R - 1
TO
R - 1
PD
U - 0
—
U - 0
—
bit0
R = Readable bit
W = Writable bit
U = Unimplemented bit,
- n = Value at POR reset
Read as ‘0’
PIC17C4X
0h (stack overflow).
DS30412C-page 37