AT90S8515-8PI Atmel, AT90S8515-8PI Datasheet - Page 91

• Manufacturer Part Number: AT90S8515-8PI
• Description: IC MCU 8K FLSH 8MHZ IT 40DIP
• Manufacturer: Atmel
• Series: AVR® 90Sr

Specifications of AT90S8515-8PI

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Data Converters: -

Notes:
0841G–09/01
1. “Max” means the highest value where the pin is guaranteed to be read as low.
2. “Min” means the lowest value where the pin is guaranteed to be read as high.
3. Although each I/O port can sink more than the test conditions (20 mA at V
4. Although each I/O port can source more than the test conditions (3 mA at V
5. Minimum V
conditions (non-transient), the following must be observed:
1] The sum of all I
2] The sum of all I
3] The sum of all I
If I
than the listed test condition.
conditions (non-transient), the following must be observed:
1] The sum of all I
2] The sum of all I
3] The sum of all I
If I
greater than the listed test condition.
OL
OH
exceeds the test condition, V
exceeds the test condition, V
CC
for power-down is 2V.
OL
OL
OL
OH
OH
OH
, for all ports, should not exceed 200 mA.
, for ports B0 - B7, D0 - D7 and XTAL2, should not exceed 100 mA.
, for ports A0 - A7, ALE, OC1B and C0 - C7 should not exceed 100 mA.
, for all ports, should not exceed 200 mA.
, for ports B0 - B7, D0 - D7 and XTAL2, should not exceed 100 mA.
, for ports A0 - A7, ALE, OC1B and C0 - C7 should not exceed 100 mA.
OL
OH
may exceed the related specification. Pins are not guaranteed to sink current greater
may exceed the related specification. Pins are not guaranteed to source current
CC
CC
= 5V, 10 mA at V
= 5V, 1.5 mA at V
CC
CC
= 3V) under steady state
= 3V) under steady state
AT90S8515
91