PIC16F874-10E/P Microchip Technology, PIC16F874-10E/P Datasheet - Page 327

• Manufacturer Part Number: PIC16F874-10E/P
• Description: IC MCU FLASH 4KX14 EE 40DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F874-10E/P

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Size: 7KB (4K x 14)
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: PIC16F87410E/P

Figure 17-35: Bus Collision During Start Condition (SDA only)
Figure 17-36: Bus Collision During Start Condition (SCL = 0)
1997 Microchip Technology Inc.
SDA
SCL
SEN
S
BCLIF
SSPIF
SDA
SCL
SEN
S
BCLIF
SSPIF
'0'
'0'
SCL = 0 before BRG time out,
Bus collision occurs, Set BCLIF.
Set SEN, enable start
sequence if SDA = 1, SCL = 1
condition if SDA = 1, SCL=1
Set SEN, enable start
SDA sampled low before
START condition.
S bit and SSPIF set because
SDA = 0, SCL = 1
. Set BCLIF,
SDA goes low before the SEN bit is set.
S bit and SSPIF set because
SDA = 0, SCL = 1
SDA = 0, SCL = 1
Set BCLIF.
T
BRG
Preliminary
T
BRG
SSPIF and BCLIF are
cleared in software.
SEN cleared automatically because of bus collision.
SSP module reset into idle state.
SCL = 0 before SDA = 0,
Bus collision occurs, Set BCLIF.
Section 17. MSSP
SSPIF and BCLIF are
cleared in software.
Interrupts cleared
in software.
'0'
'0'
DS31017A-page 17-51
17