TS87C58X2-MCA Atmel, TS87C58X2-MCA Datasheet - Page 14
![IC MCU 8BIT 32K OTP 40MHZ 40-DIP](/photos/6/70/67049/453-40-dip_sml.jpg)
TS87C58X2-MCA
Manufacturer Part Number
TS87C58X2-MCA
Description
IC MCU 8BIT 32K OTP 40MHZ 40-DIP
Manufacturer
Atmel
Series
87Cr
Datasheet
1.TS87C54X2-LIC.pdf
(62 pages)
Specifications of TS87C58X2-MCA
Core Processor
8051
Core Size
8-Bit
Speed
40/20MHz
Connectivity
UART/USART
Peripherals
POR, WDT
Number Of I /o
32
Program Memory Size
32KB (32K x 8)
Program Memory Type
OTP
Ram Size
256 x 8
Voltage - Supply (vcc/vdd)
4.5 V ~ 5.5 V
Oscillator Type
Internal
Operating Temperature
0°C ~ 70°C
Package / Case
40-DIP (0.600", 15.24mm)
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Eeprom Size
-
Data Converters
-
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
TS87C58X2-MCA
Manufacturer:
ST
Quantity:
36 000
Part Number:
TS87C58X2-MCA
Manufacturer:
TEMIC
Quantity:
20 000
8. Timer 2
8.1
14
Auto-Reload Mode
AT/TS8xC54/8X2
The timer 2 in the
It is a 16-bit timer/counter: the count is maintained by two eight-bit timer registers, TH2 and TL2,
connected in cascade. It is controlled by T2CON register (See Table 8-1) and T2MOD register
(See Table 8-2). Timer 2 operation is similar to Timer 0 and Timer 1. C/T2 selects F
operation) or external pin T2 (counter operation) as the timer clock input. Setting TR2 allows TL2
to be incremented by the selected input.
Timer 2 has 3 operating modes: capture, autoreload and Baud Rate Generator. These modes
are selected by the combination of RCLK, TCLK and CP/RL2 (T2CON), as described in the
Atmel Wireless & Microcontrollers 8-bit Microcontroller Hardware description.
Refer to the Atmel Wireless & Microcontrollers 8-bit Microcontroller Hardware description for the
description of Capture and Baud Rate Generator Modes.
In
The auto-reload mode configures timer 2 as a 16-bit timer or event counter with automatic
reload. If DCEN bit in T2MOD is cleared, timer 2 behaves as in 80C52 (refer to the Atmel Wire-
less & Microcontrollers 8-bit Microcontroller Hardware description). If DCEN bit is set, timer 2
acts as an Up/down timer/counter as shown in Figure 8-1. In this mode the T2EX pin controls
the direction of count.
When T2EX is high, timer 2 counts up. Timer overflow occurs at FFFFh which sets the TF2 flag
and generates an interrupt request. The overflow also causes the 16-bit value in RCAP2H and
RCAP2L registers to be loaded into the timer registers TH2 and TL2.
When T2EX is low, timer 2 counts down. Timer underflow occurs when the count in the timer
registers TH2 and TL2 equals the value stored in RCAP2H and RCAP2L registers. The under-
flow sets TF2 flag and reloads FFFFh into the timer registers.
The EXF2 bit toggles when timer 2 overflows or underflows according to the the direction of the
count. EXF2 does not generate any interrupt. This bit can be used to provide 17-bit resolution
• Auto-reload mode with up or down counter
• Programmable clock-output
TS80C54/58X2
TS80C54/58X2
Timer 2 includes the following enhancements:
is compatible with the timer 2 in the 80C52.
4431E–8051–04/06
OSC
/12 (timer