AT89C5131A-PUTIM Atmel, AT89C5131A-PUTIM Datasheet - Page 80

• Manufacturer Part Number: AT89C5131A-PUTIM
• Description: IC 8051 MCU FLASH 32K USB 32QFN
• Manufacturer: Atmel
• Series: AT89C513xr

Specifications of AT89C5131A-PUTIM

• Core Processor: C52X2
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: LED, POR, PWM, WDT
• Number Of I /o: 18
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 1.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-VQFN Exposed Pad, 32-HVQFN, 32-SQFN, 32-DHVQFN
• For Use With: AT89STK-10 - KIT EVAL APPL MASS STORAGEAT89STK-05 - KIT STARTER FOR AT89C5131
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Data Converters: -

16.2
80
Registers
AT89C5130A/31A-M
Each interrupt source can also be individually programmed to one out of four priority levels by
setting or clearing a bit in the Interrupt Priority register (Table 16-3.) and in the Interrupt Priority
High register
each combination.
The PCA interrupt vector is located at address 0033H, the SPI interrupt vector is located at
address 004BH and Keyboard interrupt vector is located at address 003BH. All other vectors
addresses are the same as standard C52 devices.
Table 16-1.
A low-priority interrupt can be interrupted by a high priority interrupt, but not by another low-prior-
ity interrupt. A high-priority interrupt can’t be interrupted by any other interrupt source.
If two interrupt requests of different priority levels are received simultaneously, the request of
higher priority level is serviced. If interrupt requests of the same priority level are received simul-
taneously, an internal polling sequence determines which request is serviced. Thus within each
priority level there is a second priority structure determined by the polling sequence.
Table 16-2.
IEN0 - Interrupt Enable Register (A8h)
EA
7
(Table
IPH.x
Priority Level Bit Values
IEN0 Register
0
0
1
1
EC
6
16-4). Table 16-1. shows the bit values and priority levels associated with
ET2
5
ES
4
IPL.x
0
1
0
1
ET1
3
EX1
2
Interrupt Level Priority
3 (Highest)
0 (Lowest)
ET0
1
1
2
4337K–USB–04/08
EX0
0