C8051F007 Silicon Laboratories Inc, C8051F007 Datasheet - Page 114

• Manufacturer Part Number: C8051F007
• Description: IC 8051 MCU 32K FLASH 32LQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F00xr

Specifications of C8051F007

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 8
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 4x12b; D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Figure 16.2 shows a typical SMBus configuration. The SMBus interface will work at any voltage between 3.0V
and 5.0V and different devices on the bus may operate at different voltage levels. The SCL (serial clock) and SDA
(serial data) lines are bi-directional. They must be connected to a positive power supply voltage through a pull-up
resistor or similar circuit. When the bus is free, both lines are pulled high. Every device connected to the bus must
have an open-drain or open-collector output for both the SCL and SDA lines. The maximum number of devices on
the bus is limited only by the requirement that the rise and fall times on the bus will not exceed 300ns and 1000ns,
respectively.
16.1.
It is assumed the reader is familiar with or has access to the following supporting documents:
1. The I
2. The I
3. System Management Bus Specification -- Version 1.1, SBS Implementers Forum.
Supporting Documents
VDD = 5V
2
2
C-bus and how to use it (including specifications), Philips Semiconductor.
C-Bus Specification -- Version 2.0, Philips Semiconductor.
Figure 16.2. Typical SMBus Configuration
VDD = 3V
Master
Device
Rev. 1.7
Device 1
VDD = 5V
Slave
C8051F000/1/2/5/6/7
C8051F010/1/2/5/6/7
Device 2
VDD = 3V
Slave
SDA
SCL
114