HD64F3694H Renesas Electronics America, HD64F3694H Datasheet - Page 224

• Manufacturer Part Number: HD64F3694H
• Description: IC H8 MCU FLASH 32K 64QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3694H

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI
• Peripherals: PWM, WDT
• Number Of I /o: 29
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 14 Serial Communication Interface 3 (SCI3)
14.3.6
SCR3 is a register that enables or disables SCI3 transfer operations and interrupt requests, and is
also used to select the transfer clock source. For details on interrupt requests, refer to section 14.7,
Interrupts.
Rev.5.00 Nov. 02, 2005 Page 194 of 418
REJ09B0028-0500
Bit
1
0
Bit
7
6
5
4
Bit Name
CKS1
CKS0
Bit Name
TIE
RIE
TE
RE
Serial Control Register 3 (SCR3)
Initial
Value
0
0
Initial
Value
0
0
0
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Description
Clock Select 0 and 1
These bits select the clock source for the on-chip baud
rate generator.
00:
01: /4 clock (n = 1)
10: /16 clock (n = 2)
11: /64 clock (n = 3)
For the relationship between the bit rate register setting
and the baud rate, see section 14.3.8, Bit Rate Register
(BRR). n is the decimal representation of the value of n in
BRR (see section 14.3.8, Bit Rate Register (BRR)).
Description
Transmit Interrupt Enable
When this bit is set to 1, the TXI interrupt request is
enabled.
Receive Interrupt Enable
When this bit is set to 1, RXI and ERI interrupt requests
are enabled.
Transmit Enable
When this bit is set to 1, transmission is enabled.
Receive Enable
When this bit is set to 1, reception is enabled.
clock (n = 0)