LT1810IS8#TRPBF Linear Technology, LT1810IS8#TRPBF Datasheet - Page 10

• Manufacturer Part Number: LT1810IS8#TRPBF
• Description: IC OPAMP R-R I/O DUAL 8-SOIC
• Manufacturer: Linear Technology

Specifications of LT1810IS8#TRPBF

• Amplifier Type: General Purpose
• Number Of Circuits: 2
• Output Type: Rail-to-Rail
• Slew Rate: 350 V/µs
• Gain Bandwidth Product: 180MHz
• -3db Bandwidth: 320MHz
• Current - Input Bias: 12.5µA
• Voltage - Input Offset: 800µV
• Current - Supply: 15mA
• Current - Output / Channel: 85mA
• Voltage - Supply, Single/dual (±): 2.5 V ~ 12.6 V, ±1.25 V ~ 6.3 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

LT1809/LT1810
ELECTRICAL CHARACTERISTICS
Note 1: Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime.
Note 2: The inputs are protected by back-to-back diodes. If the differential
input voltage exceeds 1.4V, the input current should be limited to less than
10mA.
Note 3: A heat sink may be required to keep the junction temperature
below the absolute maximum rating when the output is shorted
indefi nitely.
Note 4: The LT1809C/LT1809I and LT1810C/LT1810I are guaranteed
functional over the operating temperature range of – 40°C and 85°C.
Note 5: The LT1809C/LT1810C are guaranteed to meet specifi ed
performance from 0°C to 70°C. The LT1809C/LT1810C are designed,
characterized and expected to meet specifi ed performance from –40°C
to 85°C but are not tested or QA sampled at these temperatures. The
LT1809I/LT1810I are guaranteed to meet specifi ed performance from
–40°C to 85°C.
10
Note 6: Minimum supply voltage is guaranteed by power supply rejection
ratio test.
Note 7: Output voltage swings are measured between the output and
power supply rails.
Note 8: This parameter is not 100% tested.
Note 9: Thermal resistance varies depending upon the amount of PC board
metal attached to the V
amount of 2oz of copper metal trace connecting to the V
in the thermal resistance tables in the Applications Information section.
Note 10: Matching parameters are the difference between the two
amplifi ers of the LT1810.
–
pin of the device. θ
JA
is specifi ed for a certain
–
pin as described
180910fa