MAX806SCSA+ Maxim Integrated Products, MAX806SCSA+ Datasheet - Page 12

• Manufacturer Part Number: MAX806SCSA+
• Description: IC SUPERVISOR MPU 8-SOIC
• Manufacturer: Maxim Integrated Products
• Type: Battery Backup Circuitr

Specifications of MAX806SCSA+

• Number Of Voltages Monitored: 1
• Output: Push-Pull, Totem Pole
• Reset: Active Low
• Reset Timeout: 140 ms Minimum
• Voltage - Threshold: 2.925V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Monitored Voltage: 1 V to 5.5 V
• Undervoltage Threshold: 2.88 V
• Overvoltage Threshold: 3.02 V
• Output Type: Active Low, Push-Pull
• Manual Reset: Resettable
• Watchdog: No Watchdog
• Battery Backup Switching: Backup
• Power-up Reset Delay (typ): 200 ms (Typ)
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 1 V
• Supply Current (typ): 50 uA
• Maximum Power Dissipation: 471 mW
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Power Fail Detection: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12
© 2005 Maxim Integrated Products
3.0V/3.3V Microprocessor Supervisory Circuits
*Contact factory for dice specifications.
**These parts offer a choice of reset threshold voltage. Select
the letter corresponding to the desired nominal reset threshold
voltage (T = 3.075V, S = 2.925V, R = 2.625V) and insert it into
the blank to complete the part number.
Devices in PDIP and SO packages are available in both leaded
and lead-free packaging. Specify lead free by adding the +
symbol at the end of the part number when ordering. Lead free
not available for CERDIP package.
_Ordering Information (continued)
MAX704_CPA
MAX704_CSA
MAX704_C/D
MAX704_EPA
MAX704_ESA
MAX704_MJA
MAX802_CPA
MAX802_CSA
MAX802_C/D
MAX802_EPA
MAX802_ESA
MAX802_MJA
MAX804_CPA
MAX804_CSA
MAX804_C/D
MAX804_EPA
MAX804_ESA
MAX804_MJA
MAX805_CPA
MAX805_CSA
MAX805_C/D
MAX805_EPA
MAX805_ESA
MAX805_MJA
MAX806_CPA
MAX806_CSA
MAX806_C/D
MAX806_EPA
MAX806_ESA
MAX806_MJA
__________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 [phone]
PART**
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
TEMP RANGE
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
8 Plastic DIP
8 SO
Dice*
8 Plastic DIP
8 SO
8 CERDIP
8 Plastic DIP
8 SO
Dice*
8 Plastic DIP
8 SO
8 CERDIP
8 Plastic DIP
8 SO
Dice*
8 Plastic DIP
8 SO
8 CERDIP
8 Plastic DIP
8 SO
Dice*
8 Plastic DIP
8 SO
8 CERDIP
8 Plastic DIP
8 SO
Dice*
8 Plastic DIP
8 SO
8 CERDIP
Printed USA
PIN-PACKAGE
TRANSISTOR COUNT: 802;
SUBSTRATE IS CONNECTED TO THE HIGHER OF
V
HYBRID DESIGN.
___________________Chip Topography
( ) ARE FOR MAX804T/S/R, MAX805T/S/R.
[ ] ARE FOR MAX704T/S/R, MAX806T/S/R.
CC
GND
is a registered trademark of Maxim Integrated Products, Inc.
V
CC
OR VBATT, AND MUST BE FLOATED IN ANY
(2.032mm)
PFI PFO
0.080"
V
OUT
VBATT
RESET
(RESET)
WDI
[MR]
(2.794mm)
0.110"