DS1834D Maxim Integrated Products, DS1834D Datasheet - Page 2

• Manufacturer Part Number: DS1834D
• Description: IC ECONORST DUAL ACT HI PP 8-DIP
• Manufacturer: Maxim Integrated Products
• Series: EconoResetr
• Type: Multi-Voltage Supervisorr

Specifications of DS1834D

• Number Of Voltages Monitored: 2
• Output: Push-Pull, Totem Pole
• Reset: Active High
• Reset Timeout: 200 ms Minimum
• Voltage - Threshold: 3.3V, 5V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Through Hole
• Package / Case: 8-DIP (0.300", 7.62mm)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

DS1834/A/D
OPERATION
Power Monitor
The DS1834 provides the functions of detecting out-of-tolerance conditions on a 3.3-volt and 5-volt
power supply and warning a processor-based system of impending power failure. When an input is
detected as out of tolerance on either voltage input the RST for that supply will be forced active. When
that input returns to a valid state the RST will remain active for about 350 ms and then return to an
inactive state until the next input out-of-tolerance condition.
On power-up both resets are kept active for approximately 350 ms after the power supply inputs have
reached the selected tolerance. This allows the power supply and system power to stabilize before RST is
released.
All internal operating current for the DS1834 will be drawn from the input with the highest voltage level.
The outputs will draw current only from the controlling input (5V IN or 3.3V IN).
DS1834 BLOCK DIAGRAM Figure 1
DS1834A BLOCK DIAGRAM OUTPUT Figure 2
2 of 7