B59885C0120A070 EPCOS Inc, B59885C0120A070 Datasheet - Page 6
![PTC RESETTABLE 15MA 500V RAD](/photos/1/32/13281/b59885c0120a070_sml.jpg)
B59885C0120A070
Manufacturer Part Number
B59885C0120A070
Description
PTC RESETTABLE 15MA 500V RAD
Manufacturer
EPCOS Inc
Datasheet
1.B59885C0120A070.pdf
(9 pages)
Specifications of B59885C0120A070
R Min/max
675.0 ~ 1200 Ohm
Voltage - Max
500V
Current - Hold (ih) (max)
15mA
Current - Trip (it)
30mA
Current - Max
100mA
Package / Case
Radial
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Time To Trip
-
Other names
495-3893
B59885C0120A070
B59885C120A70
Q1767416
Q3124771
Q3130732
B59885C0120A070
B59885C120A70
Q1767416
Q3124771
Q3130732
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
B59885C0120A070
Manufacturer:
TI
Quantity:
17
Mounting
Operation
Please read Cautions and warnings and
Important notes at the end of this document.
Overcurrent protection
Leaded disks, coated, 380 V, 500 V
Electrode must not be scratched before/during/after the mounting process.
Contacts and housing used for assembly with thermistor have to be clean before mounting. Es-
pecially grease or oil must be removed.
When PTC thermistors are encapsulated with sealing material, the precautions given in chapter
"Mounting instructions", "Sealing and potting" must be observed.
When the thermistor is mounted, there must not be any foreign body between the electrode of
the thermistor and the clamping contact.
The minimum force of the clamping contacts pressing against the PTC must be 10 N.
During operation, the thermistor’s surface temperature can be very high. Ensure that adjacent
components are placed at a sufficient distance from the thermistor to allow for proper cooling at
the thermistors.
Ensure that adjacent materials are designed for operation at temperatures comparable to the
surface temperature of thermistor. Be sure that surrounding parts and materials can withstand
this temperature.
Avoid contamination of thermistor surface during processing.
Use thermistors only within the specified temperature operating range.
Use thermistors only within the specified voltage and current ranges.
Environmental conditions must not harm the thermistors. Use thermistors only in normal at-
mospheric conditions. Avoid use in deoxidizing gases (chlorine gas, hydrogen sulfide gas, am-
monia gas, sulfuric acid gas etc), corrosive agents, humid or salty conditions. Contact with any
liquids and solvents should be prevented.
Be sure to provide an appropriate fail-safe function to prevent secondary product damage
caused by abnormal function (e.g. use VDR for limitation of overvoltage condition).
Page 6 of 9
C884, C885, C886