60R017XU Littelfuse Inc, 60R017XU Datasheet - Page 3

• Manufacturer Part Number: 60R017XU
• Description: PTC .17A 60V RESETTABLE KINK
• Manufacturer: Littelfuse Inc
• Series: POLYFUSE® 60Rr

Specifications of 60R017XU

• R Min/max: 3.300 ~ 8.000 Ohm
• Voltage - Max: 60V
• Time To Trip: 3s
• Current - Hold (ih) (max): 170mA
• Current - Trip (it): 340mA
• Current - Max: 40A
• Package / Case: Radial
• Holding Current: 170mA
• Tripping Current: 340mA
• Initial Resistance Max: 8ohm
• Operating Voltage: 60VDC
• Ptc Fuse Case: Radial Lead
• Initial Resistance Min: 3.3ohm
• Lead Spacing: 5.08mm
• Fuse Terminals: Radial Leaded
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 060R0017; 060R0017U; 60R017; F2001

© 2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/60R.html for current information.
Soldering Parameters - Wave Soldering
Pre-Heating Zone
Soldering Zone
Cooling Zone
Physical Specifications
Lead Material
Soldering
Characteristics
Insulating Material
Device Labeling
.20-.40A: Tin-plated Copper clad steel
.50-3.75A: Tin-plated Copper
Solderability per MIL–STD–202,
Method 208E
Cured, flame retardant epoxy polymer
meets UL94V-0 requirements.
Marked with ‘LF’, voltage, current rating,
and date code.
Refer to the condition
recommended by the
flux manufacturer.
Max. ramping rate
should not exceed 4°C/
Sec.
Max. solder
temperature should not
exceed 260°C
Cooling by natural
convection in air.
Radial Leaded > 60R Series
POLYFUSE
Revised: July 12, 2010
®
8
Resettable PTCs
Operating/Storage
Temperature
Maximum Device Surface
Temperature in Tripped State
Passive Aging
Humidity Aging
Thermal Shock
Solvent Resistance
Moisture Resistance Level
Environmental Specifications
260
220
190
160
0
Preheating
60 min.
Soldering
-40°C to +85°C
125°C
+85°C, 1000 hours
-/+ 5% typical resistance
change
+85°C, 85% R.H.,1000 hours
-/+ 5% typical resistance
change
+85°C to -40°C 10 times
-/+ 5% typical resistance
change
MIL–STD–202, Method 215F
Level 1, J–STD–020C
5 max.
Time(s)
Cooling
60R Series