LM2931AT-5.0/NOPB National Semiconductor, LM2931AT-5.0/NOPB Datasheet - Page 4

• Manufacturer Part Number: LM2931AT-5.0/NOPB
• Description: IC REGULATOR LDO 5V TO220-3
• Manufacturer: National Semiconductor
• Type: Linearr

Specifications of LM2931AT-5.0/NOPB

• Regulator Topology: Positive Fixed
• Voltage - Output: 5V
• Voltage - Input: Up to 26V
• Voltage - Dropout (typical): 0.3V @ 100mA
• Number Of Regulators: 1
• Current - Output: 100mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Through Hole
• Package / Case: TO-220-3 (Straight Leads)
• Package: 3TO-220
• Function: LDO
• Number Of Outputs: 1
• Output Voltage: 5 V
• Maximum Output Current: 0.1(Typ) A
• Output Type: Fixed
• Accuracy: ±3.8 %
• Typical Dropout Voltage @ Current: 0.05@10mA|0.3@100mA V
• Polarity: Positive
• Current, Output: 100 mA
• Current, Supply: 15 mA
• Package Type: TO-220
• Regulation, Line: 4 mV
• Regulation, Load: 14 mV
• Regulator Type: Low Dropout
• Resistance, Thermal, Junction To Case: 3 °C/W
• Temperature, Operating, Range: -40 to +85 °C
• Voltage, Dropout: 0.3 V
• Voltage, Input: 33 V
• Voltage, Noise: 500 μV
• Voltage, Output: 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device
• Other names: *LM2931AT-5.0; *LM2931AT-5.0/NOPB; LM2931AT-5.0NS

Typical Applications
LM2931 Fixed Output
525404
*Required if regulator is located far from power supply filter.
**C2 must be at least 100 μF to maintain stability. May be increased without bound to maintain regulation during transients. Locate as close as possible to the
regulator. This capacitor must be rated over the same operating temperature range as the regulator. The equivalent series resistance (ESR) of this capacitor is
critical; see curve.
LM2931 Adjustable Output
525405
due to the input bias current of the ADJ pin (approximately 1 μA).
Note: Using 27k for R1 will automatically compensate for errors in V
OUT
www.national.com
4