AS1360-50-T austriamicrosystems, AS1360-50-T Datasheet - Page 9

• Manufacturer Part Number: AS1360-50-T
• Description: IC LDO 250MA 5.0V SOT23-3
• Manufacturer: austriamicrosystems

Specifications of AS1360-50-T

• Regulator Topology: Positive Fixed
• Voltage - Output: 5V
• Voltage - Input: Up to 20V
• Voltage - Dropout (typical): 0.4V @ 200mA
• Number Of Regulators: 1
• Current - Output: 250mA (Min)
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: SOT-23-3, TO-236-3, Micro3™, SSD3, SST3
• Primary Input Voltage: 6V
• Output Voltage Fixed: 5V
• Dropout Voltage Vdo: 400mV
• No. Of Pins: 3
• Output Current: 250mA
• Operating Temperature Range: -40°C To +85°C
• Filter Terminals: SMD
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Other names: AS1360-50-TTR

AS1360
Datasheet - A p p l i c a t i o n I n f o r m a t i o n
External Component Selection
Input Capacitor
In applications where input impedance is approximately 10Ω, a 1µF capacitor is sufficient for C
page
In cases where the AS1360 is operated from a battery, or when there is significant distance between the input source
to the AS1360, larger values for C
Note: For values of C
Output Capacitor
In most applications for the AS1360, a 1µF capacitor (ESR > 0.1Ω/< 5Ω, f
ure 14 on page
For improved power supply noise rejection and device transient response, larger values can be used for C
Note: For values of C
www.austriamicrosystems.com/LDOs/AS1360
8).
lations.
8).
OUT
OUT
> 1µF, the value of C
> 1µF, the input impedance must not be so large that it causes high-input impedance oscil-
IN
may be required for output stability.
IN
should be increased to prevent high source-impedance oscillations.
Revision 1.05
RES
> 1MHz) is sufficient for C
IN
(see Figure 14 on
OUT
OUT
(see Fig-
.
9 - 12