16R600GPR Littelfuse Inc, 16R600GPR Datasheet - Page 3

• Manufacturer Part Number: 16R600GPR
• Description: PTC RESETTABLE 16V 6A RADIAL
• Manufacturer: Littelfuse Inc
• Series: POLYFUSE® 16Rr

Specifications of 16R600GPR

• R Min/max: 0.010 ~ 0.028 Ohm
• Voltage - Max: 16V
• Time To Trip: 3.3s
• Current - Hold (ih) (max): 6A
• Current - Trip (it): 10.2A
• Current - Max: 100A
• Package / Case: Radial
• Hold Current: 6 Amps
• Trip Current: 10.2 Amps
• Current Rating (max): 100 Amps
• Resistance: 0.028 Ohms
• Maximum Voltage: 16 VoltsDC
• Termination Style: Radial
• Mounting Style: Through Hole
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

© 2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/16R.html for current information.
Soldering Parameters - Wave Soldering
Pre-Heating Zone
Soldering Zone
Cooling Zone
Physical Specifications
Lead Material
Soldering
Characteristics
Insulating Material
Device Labeling
2.5A: Tin-plated Copper clad Steel
3.0 - 14.0A: Tin-plated Copper
Solderability per MIL–STD–202,
Method 208E
Cured, flame retardant epoxy polymer
meets UL94V-0 requirements.
Marked with ‘LF’, voltage, current rating,
and date code.
Refer to the condition
recommended by the
flux manufacturer.
Max. ramping rate
should not exceed 4°C/
Sec.
Max. solder
temperature should not
exceed 260°C
Cooling by natural
convection in air.
Radial Leaded > 16R Series
POLYFUSE
Revised: July 12, 2010
®
71
Resettable PTCs
Operating/Storage
Temperature
Maximum Device Surface
Temperature in Tripped State
Passive Aging
Humidity Aging
Thermal Shock
Solvent Resistance
Moisture Resistance Level
Environmental Specifications
260
220
190
160
0
Preheating
60 min.
Soldering
5 max.
Time(s)
-40°C to +85°C
125°C
+85°C, 1000 hours
-/+ 5% typical resistance
change
+85°C, 85% R.H., 1000 hours
-/+ 5% typical resistance
change
+85°C to -40°C 10 times
-/+ 5% typical resistance
change
MIL–STD–202, Method 215F
No change
Level 1, J–STD–020C
Cooling
16R Series