AS1360-25-T austriamicrosystems, AS1360-25-T Datasheet - Page 7

• Manufacturer Part Number: AS1360-25-T
• Description: IC REG LDO 125MA 2.5V TSOT23-3
• Manufacturer: austriamicrosystems

Specifications of AS1360-25-T

• Package / Case: SOT-23-3, TO-236-3, Micro3™, SSD3, SST3
• Mounting Type: Surface Mount
• Current - Output: 125mA (Min)
• Voltage - Output: 2.5V
• Voltage - Input: Up to 20V
• Operating Temperature: -40°C ~ 85°C
• Regulator Topology: Positive Fixed
• Voltage - Dropout (typical): 0.4V @ 120mA
• Number Of Regulators: 1
• Primary Input Voltage: 3.5V
• Output Voltage Fixed: 2.5V
• Dropout Voltage Vdo: 400mV
• No. Of Pins: 3
• Output Current: 125mA
• Operating Temperature Range: -40°C To +85°C
• Filter Terminals: SMD
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -

AS1360
Data Sheet - D e t a i l e d D e s c r i p t i o n
8 Detailed Description
The AS1360 is a low-power, positive voltage regulator designed in such a way that the supply current is independent
from the load current. The device regulates the output by comparing the output voltage to an internally generated refer-
ence voltage.
The device is available in fixed output voltages of 1.8, 2.5, 3.0, 3.3, and 5.0V. Fixed output voltages are generated
using the internal resistor divider network
(see Figure 1 on page
1).
Short Circuit/Overcurrent Protection
The AS1360 monitors current flow through the p-channel MOSFET. In short-circuit or overcurrent conditions, the inte-
grated short-circuit protection circuitry will limit output current.
Note: Thermal Dissipation according to
Absolute Maximum Ratings on page 3
must be considered.
www.austriamicrosystems.com
Revision 1.03
7 - 12