MCT0603MD3322DP500 Vishay, MCT0603MD3322DP500 Datasheet - Page 5

• Manufacturer Part Number: MCT0603MD3322DP500
• Description: RES 33.2K OHM 0.15W 0.5% 0603
• Manufacturer: Vishay
• Series: MCT 0603r

Specifications of MCT0603MD3322DP500

• Temperature Coefficient: ±25ppm/°C
• Resistance (ohms): 33.2K
• Power (watts): 0.15W
• Composition: Thin Film
• Tolerance: ±0.5%
• Size / Dimension: 0.061" L x 0.033" W (1.55mm x 0.85mm)
• Height: 0.018" (0.45mm)
• Lead Style: Surface Mount (SMD - SMT)
• Package / Case: 0603 (1608 Metric)
• Resistance In Ohms: 33.2K
• Case: 0603 (1608 metric)
• Resistance: 33.2kohm
• Resistance Tolerance: ± 0.5%
• Power Rating: 150mW
• Voltage Rating: 75V
• Resistor Element Material: Thin Film
• Resistor Case Style: 0603
• Termination Style: SMD/SMT
• Dimensions: 0.85 mm W x 1.55 mm L x 0.45 mm H
• Product: Thin Film Resistors SMD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Details
• Other names: MCT0603-33.2K-MDTR

www.vishay.com
5
MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Professional
Vishay Beyschlag
DESCRIPTION
Production is strictly controlled and follows an extensive set
of
homogeneous film of metal alloy is deposited on a high grade
(96 % Al
the desired temperature coefficient. Specially designed inner
contacts are deposited on both sides. A special laser is used
to achieve the target value by smoothly cutting a meander
groove in the resistive layer without damaging the ceramics.
The resistor elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure tin on nickel plating.
The result of the determined production is verified by an
extensive
performed on 100 % of the individual chip resistors. Only
accepted products are laid directly into the paper tape in
accordance with EN 60286-3.
ASSEMBLY
The resistors are suitable for processing on automatic SMD
assembly systems. They are suitable for automatic soldering
using wave, reflow or vapour phase as shown in
IEC 61760-1*. The encapsulation is resistant to all cleaning
solvents commonly used in the electronics industry,
including alcohols, esters and aqueous solutions. The
suitability of conformal coatings, if applied, shall be qualified
by appropriate means to ensure the long-term stability of the
whole system. The resistors are RoHS compliant; the pure
tin plating provides compatibility with lead (Pb)-free and
lead-containing
specified for 2 years after production or requalification. The
permitted storage time is 20 years. The immunity of the
Notes
•
(1)
(2)
The quoted IEC standards marked with an asterisk (*) are also released as EN standards with the same number and identical contents
Global Automotive Declarable Substance List, see www.gadsl.org
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see www.eicta.org → issue →
environment policy → chemicals → chemicals for electronics
instructions
2
O
3
testing
) ceramic substrate and conditioned to achieve
soldering
established
procedure
processes.
Professional Automotive Thin Film Chip Resistor
For technical questions, contact: [e-mail]
and
for
reproducibility.
optical
Solderability
inspection
is
A
plating against tin whisker growth has been proven under
extensive testing.
All products comply with the GADSL
CEFIC-EECA-EICTA
hazardous substances. This includes full compliance with
the following directives:
• 2000/53/EC End of Vehicle life Directive (ELV) and
• 2002/95/EC Restriction of the use of Hazardous
• 2002/96/EC Waste Electrical and Electronic Equipment
APPROVALS
The resistors are tested in accordance with EN 140401-801
(superseding CECC 40401-801) which refers to EN 60115-1
and EN 140400. The approval is valid with regards to rated
power P
Approval of conformity is indicated by the CECC logo on the
package label.
Vishay
Manufacturer“ in accordance with EN 100114-1. The
release certificate for “Technology Approval Schedule“ in
accordance with CECC 240 001 based on EN 100114-6 is
granted for the Vishay BEYSCHLAG manufacturing process.
SPECIALS
This product family of thin film flat chip resistors is completed
by Zero Ohm Jumpers.
Annex II (ELV II)
Substances directive (RoHS)
Directive (WEEE)
70
BEYSCHLAG
and a temperature range of - 55 °C to 155 °C.
(2)
has
list of legal restrictions on
achieved
Document Number: 28760
Revision: 16-Jul-08
“Approval
(1)
and the
of