V5.5MLA0805LH Littelfuse Inc, V5.5MLA0805LH Datasheet - Page 6
![VARISTOR TVS MULTI 5.5V 40A 0805](/photos/1/40/14090/tvs_varistor_0805_sml.jpg)
V5.5MLA0805LH
Manufacturer Part Number
V5.5MLA0805LH
Description
VARISTOR TVS MULTI 5.5V 40A 0805
Manufacturer
Littelfuse Inc
Series
MLr
Specifications of V5.5MLA0805LH
Package / Case
0805 (2012 Metric)
Varistor Voltage
9.3V
Current-surge
40A
Number Of Circuits
1
Maximum Ac Volts
4VAC
Maximum Dc Volts
5.5VDC
Energy
0.10J
Voltage Rating Dc
5.5 V
Voltage Rating Ac
4 V
Clamping Voltage
17.5 V
Peak Surge Current
40 A
Surge Energy Rating
0.3 J
Capacitance
990 pF
Operating Temperature Range
- 55 C to + 125 C
Dimensions
1.25 mm W x 2.01 mm L x 1.1 mm H
Mounting
SMD/SMT
Product
MLV
Termination Style
SMD/SMT
Lead Free Status / RoHS Status
Lead free by exemption / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free by exemption / RoHS Compliant
Other names
F2216TR
V5.5MLA0805L
V5.5MLA0805L
MLA Varistor Series
Lead (Pb) Soldering Recommendations
The principal techniques used for the soldering of
components in surface mount technology are IR Re-flow
and Wave soldering. Typical profiles are shown on the right.
The recommended solder for the MLA suppressor is
Littelfuse also recommends an RMA solder flux.
Wave soldering is the most strenuous of the processes.
To avoid the possibility of generating stresses due to
thermal shock, a preheat stage in the soldering process
is recommended, and the peak temperature of the solder
process should be rigidly controlled.
When using a reflow process, care should be taken to
ensure that the MLA chip is not subjected to a thermal
gradient steeper than 4 degrees per second; the ideal
gradient being 2 degrees per second. During the soldering
process, preheating to within 100 degrees of the solder's
peak temperature is essential to minimize thermal shock.
still necessary to ensure that any further thermal shocks
printed circuit boards being removed from the solder
process and subjected to cleaning solvents at room
temperature. The boards must be allowed to cool gradually
to less than 50º C before cleaning.
Lead–free (Pb-free) Soldering Recommendations
Littelfuse offers the Nickel Barrier Termination option (see
optimum Lead–free solder performance, consisting of a
Matte Tin outer surface plated on Nickel underlayer, plated
on Silver base metal.
flux, but there is a wide selection of pastes and fluxes
available with which the Nickel Barrier parts should be
compatible.
The reflow profile must be constrained by the maximums
evaluation purposes by Littelfuse, based upon industry
standards and practices. There are multiple choices of all
three available, it is advised that the customer explores the
optimum combination for their process as processes vary
considerably from site to site.
Surface Mount Multilayer Varistors (MLVs) > MLA Series
Revision: November 10, 2010
Varistor Products
Figure 14
Figure 15
Figure 16
Reflow Solder Profile
Wave Solder Profile
Lead–free Re-flow Solder Profile
300
250
200
100
250
200
150
100
150
300
250
200
150
100
50
50
50
Please refer to www.littelfuse.com/series/ML.html or MLA.html for current information.
0
0
0
0.0
0
0
0.5
0.5
MAXIMUM TEMPERATURE 260˚C,
TIME WITHIN 5˚C OF PEAK
20 SECONDS MAXIMUM
1.0
PREHEAT ZONE
PREHEAT ZONE
1.0
1.0
PREHEAT DWELL
FIRST PREHEAT
2.0
MAXIMUM TEMPERATURE
1.5
1.5
TIME (MINUTES)
TIME (MINUTES)
MAXIMUM WAVE 260°C
TIME (MINUTES)
RAMP RATE
<3˚C/s
3.0
2.0
Specifications are subject to change without notice.
230°C
2.0
SECOND PREHEAT
RAMP RATE
<2°C/s
2.5
4.0
2.5
ABOVE 183°C
SECONDS
3.0
40-80
5.0
60 - 150 SEC
3.0
> 217˚C
3.5
6.0
3.5
©2010 Littelfuse, Inc.
4.0
4.0
4.5
7.0