B72735D50H62 EPCOS Inc, B72735D50H62 Datasheet - Page 16
![CERADIODE ARRAY 5.6VDC 1012](/photos/1/40/14097/b72735d50h62_sml.jpg)
B72735D50H62
Manufacturer Part Number
B72735D50H62
Description
CERADIODE ARRAY 5.6VDC 1012
Manufacturer
EPCOS Inc
Series
CeraDioder
Datasheet
1.B72590D0050H160.pdf
(22 pages)
Specifications of B72735D50H62
Package / Case
1012 (2532 Metric)
Varistor Voltage
52V
Number Of Circuits
4
Maximum Dc Volts
5.6VDC
Polarity
Bidirectional
Channels
3 Channels
Clamping Voltage
195 V
Operating Voltage
5.6 V
Breakdown Voltage
52 V
Termination Style
SMD/SMT
Capacitance
7 pF
Maximum Operating Temperature
+ 85 C
Minimum Operating Temperature
- 40 C
Mounting Style
SMD/SMT
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Energy
-
Current-surge
-
Maximum Ac Volts
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
495-3423-2
CDA6C05GTH
CDA6C05GTH
5
5.1
5.2
Manual soldering with a soldering iron must be avoided, hot-air methods are recommended for
making repairs.
5.3
All environmentally compatible agents are suitable for cleaning. Select the appropriate cleaning
solution according to the type of flux used. The temperature difference between the components
and cleaning liquid must not be greater than 100 C. Ultrasonic cleaning should be carried out
with the utmost caution. Too high ultrasonic power can impair the adhesive strength of the metal-
lized surfaces. Insufficient or excessive cleaning can be detrimental to CeraDiode performance.
5.4
An excessive application of solder paste results in too high a solder fillet, thus making the chip
more susceptible to mechanical and thermal stress. This will lead to the formation of cracks. Too
little solder paste reduces the adhesive strength on the outer electrodes and thus weakens the
bonding to the PCB. The solder should be applied smoothly to the end surface to a height of
min. 0.2 mm.
5.5
Used flux should have less than or equal to 0.1 wt % of halogenated content, since flux residue
after soldering could lead to corrosion of the termination and/or increased leakage current on the
surface of the CeraDiode. Strong acidic flux must not be used. The amount of flux applied should
be carefully controlled, since an excess may generate flux gas, which in turn is detrimental to sol-
derability.
5.6
Solderability is guaranteed for one year from date of delivery, provided that components are
stored in their original packages.
Storage temperature:
Relative humidity:
The solderability of the external electrodes may deteriorate if SMDs are stored where they are ex-
posed to high humidity, dust or harmful gas (hydrogen chloride, sulfurous acid gas or hydrogen
sulfide).
Do not store SMDs where they are exposed to heat or direct sunlight. Otherwise the packing ma-
terial may be deformed or SMDs may stick together, causing problems during mounting.
After opening the factory seals, such as polyvinyl-sealed packages, it is recommended to use the
SMDs as soon as possible.
Please read Cautions and warnings and
Important notes at the end of this document.
CeraDiodes
High-speed series
The average ramp-up rate must not exceed 3 C/s.
The cooling rate must not exceed 8 C/s.
Notes for proper soldering
Preheating and cooling
Repair / rework
Cleaning
Solder paste printing (reflow soldering)
Selection of flux
Storage
75% annual average, 95% on 30 days a year
25 C to +45 C
Page 16 of 22