MCR100JZHFLR240 Rohm Semiconductor, MCR100JZHFLR240 Datasheet

RES .24 OHM 1W 1% 2512 SMD

MCR100JZHFLR240

Manufacturer Part Number
MCR100JZHFLR240
Description
RES .24 OHM 1W 1% 2512 SMD
Manufacturer
Rohm Semiconductor
Series
MCR100r
Datasheet

Specifications of MCR100JZHFLR240

Resistance (ohms)
0.24
Power (watts)
1W
Composition
Thick Film
Temperature Coefficient
±100ppm/°C
Tolerance
±1%
Size / Dimension
0.248" L x 0.126" W (6.30mm x 3.20mm)
Height
0.022" (0.55mm)
Lead Style
Surface Mount (SMD - SMT)
Package / Case
2512 (6432 Metric)
Resistance In Ohms
0.24
Case
2512 (6432 metric)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Other names
RHM.24WTR
Resistors
Thick Film Chip Resistors
MCR100 (2512 size : 1W)
1) Made of same material as the general purpose chip resistors (MCR10 / 18).
2) Highly reliable chip resistor
3) Electrodes not corroded by soldering
4) ROHM resistors have approved ISO9001- / ISO/TS 16949- certification.
•Before using components in circuits where they will be exposed to transients such as pulse loads (short-duration, high-level loads), be certain to evaluate the
Jumper type
Rated power
Rated voltage
Nominal resistance
Operating temperature
component in the mounted state. In addition, the reliability and performance of this component cannot be guaranteed if it is used with a steady state voltage that
is greater than its rated voltage.
Features
Ratings
Resistance
Rated current
Operating temperature
Ruthenium oxide dielectric offers superior resistance to the elements.
Suitable for re-flow soldering.
Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with
the product before using or ordering it.
Item
Power must be derated according to the power derating curve in
Figure 1 when ambient temperature exceeds 70°C.
See Table 1.
The voltage rating is calculated by the following equation. If the value
obtained exceeds the limiting element voltage, the voltage rating is
equal to the maximum operating voltage.
E = P × R
−55°C to+125°C
100
80
60
40
20
0
Max. 50mΩ
−55
4A
E: Rated voltage (V)
P: Rated power (W)
R: Nominal resistance (Ω)
AMBIENT TEMPERATURE (°C)
0
Conditions
Fig.1
Table 1
Resistance tolerance
F (±1%)
J (±5%)
70
100
125
10≤R≤82k
1.0≤R<2.0
2.2≤R<9.1
10≤R<22
24≤R≤100k
Resistance range
(Ω)
Limiting element voltage
1W at 70°C
−55°C to +125°C
(E24,96)
(E24)
(E24)
(E24)
(E24)
Specifications
Resistance temperature coefficient
(ppm / °C)
Rev.D
500±350
±100
±500
±350
±200
MCR100
200V
1/3

Related parts for MCR100JZHFLR240

MCR100JZHFLR240 Summary of contents

Page 1

... Resistors Thick Film Chip Resistors MCR100 (2512 size : 1W) Features 1) Made of same material as the general purpose chip resistors (MCR10 / 18). 2) Highly reliable chip resistor Ruthenium oxide dielectric offers superior resistance to the elements. 3) Electrodes not corroded by soldering Suitable for re-flow soldering. 4) ROHM resistors have approved ISO9001- / ISO/TS 16949- certification. ...

Page 2

... Resistors Characteristics Item Resistor type J : ±5% Resistance F : ±1% Variation of resistance with temperature ± (2.0%+0.1Ω) Overload A new uniform coating of minimum of 95% of the surface being immersed Solderability and no soldering damage. ± (1.0%+0.05Ω) Resistance to No remarkable abnormality on the appearance. soldering heat ± ...

Page 3

... Resistors Packaging Reel +1.0 φ180 φ60 13 −1.5 −0 0 Part No. Explanation M C Part No. Packaging Specifications Code Resistance tolerance Part No. Code ± J( 5%) F( MCR100 JZH Reel ( φ 180) : JEITA ET-7200B : Standard product Taping Label W EIAJ ET-7200B compliant 12.0 ± 0.3 (Unit : mm φ13 ± 0.2 φ ...

Page 4

Appendix No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product ...

Related keywords