RR0816P-3921-D-58H Susumu, RR0816P-3921-D-58H Datasheet - Page 11
![RES 3.92K OHM 1/16W .5% 0603 SMD](/photos/12/86/128631/rr_0402_series_sml.jpg)
RR0816P-3921-D-58H
Manufacturer Part Number
RR0816P-3921-D-58H
Description
RES 3.92K OHM 1/16W .5% 0603 SMD
Manufacturer
Susumu
Series
RRr
Datasheet
1.RR0816P-102-D.pdf
(16 pages)
Specifications of RR0816P-3921-D-58H
Resistance (ohms)
3.92K
Power (watts)
0.063W, 1/16W
Composition
Thin Film
Temperature Coefficient
±25ppm/°C
Tolerance
±0.5%
Size / Dimension
0.063" L x 0.031" W (1.60mm x 0.80mm)
Height
0.016" (0.40mm)
Lead Style
Surface Mount (SMD - SMT)
Package / Case
0603 (1608 Metric)
Resistance In Ohms
3.92K
Case
0603 (1608 metric)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Other names
RR08P3.92KDTR
TITLE:
Test board
Mounting method
(1) Mounting method according to solder bath method
(2) Mounting method according to reflow soldering method
Test board A ( For substrate banding, adhesion test,
Test board B( For another test,
Epoxy based adhesive agent shall be applied in the middle between the lands of the test board and the
resistor shall be mounted in such a way that resistor's electrodes will be evenly placed in the land area
and then the adhesive agent shall be hardened. Then a methanol medium of 25% colophony by specific
weight is used as flux (if non-deviant test results are assurable over the counter colophony based flux
may be used) and is soldered by dipping in a molten solder bath of 260±5 deg C and immersed for 3 to
5 s.
About 200 μm of solder cream is applied in the land portion of the test boards and the resistor shall be
mounted in such a way so that the resistor's electrodes will be evenly placed on the land. It is soldered
under the conditions of board surface temperature 240 to 250deg C(peak temperature) for 5 to 10 s. in
an upper-portion heated oven.
Chip resistor RR0816 series
Material: Glass fabric base epoxy resin 1.6mm
Copper foil, thickness 0.035 mm
Solder resist coating
Material: Glass fabric base epoxy resin 1.6mm
Copper foil, thickness 0.035 mm
Solder resist coating
Specification for
see Fig.5)
SUSUMU
CO.,LTD
see Fig.4)
SPEC.NO:
RR00-1098
Rev. No.
11/16
0