ERJ-XGNJ514Y Panasonic - ECG, ERJ-XGNJ514Y Datasheet - Page 9
![RESISTOR 510K OHM 1/32W 5% 01005](/photos/12/73/127323/10-01005_sml.jpg)
ERJ-XGNJ514Y
Manufacturer Part Number
ERJ-XGNJ514Y
Description
RESISTOR 510K OHM 1/32W 5% 01005
Manufacturer
Panasonic - ECG
Series
ERJr
Datasheet
1.ERJ-XGNJ102Y.pdf
(12 pages)
Specifications of ERJ-XGNJ514Y
Resistance (ohms)
510K
Power (watts)
0.03W, 1/32W
Composition
Thick Film
Temperature Coefficient
±200ppm/°C
Tolerance
±5%
Size / Dimension
0.016" L x 0.008" W (0.40mm x 0.20mm)
Height
0.005" (0.13mm)
Lead Style
Surface Mount (SMD - SMT)
Package / Case
01005 (0402 Metric)
Resistance In Ohms
510K
Case
01005 (0402 metric)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Other names
ERJXGNJ514Y
Subject
Part No.
10. Storage Method
Chip Resistor
If the product is stored in the following environments and conditions, the performance and
solderability may be badly affected, avoid the storage in the following environments.
(1) Storage in places full of corrosive gases such as sea breeze, Cl
(2) Storage in places exposed to direct sunlight.
(3) Storage in places outside the temperature range of 5 deg.C to 35 deg.C and humidity
(4) Storage over a year after our delivery (This item also applies to the case where the storage
(7) Halogen type (Chlorine type, Bromine type, etc.) or other high-activity flux is not
(8) When soldering with soldering iron, ground a tip of the soldering iron never touch the body
(9) Avoid physical shock to the resistor and nipping of the resistor with hard tool (a pair of
(10) Avoid immersion of chip resistor in solvent for long time. Use solvent after the effect of
(11) This resistance may change with ESD.
range of 45 %RH to 85 %RH.
method specified in item (1) to (3) has been followed.).
may impair performance and/or reliability of resistor. Never exceed the rated power. When
the product shall be used under special condition, be sure to ask us in advance.
recommended as the residue may affect performance or reliability of resistors.
of the chip resistor with a tip of the soldering iron. When using a soldering iron with a tip
at high temperature, solder for a time as short as possible. (three seconds or less up to
350 deg.C)
pliers or tweezers) as it may damage protective film or the body of resistor and may affect
resistor’s performance.
immersion is confirmed.
In case of handling this product, please take care as follows.
Environment which static electricity cannot generate easily.
Wearing of an earth band and a conductive glove.
Connecting surface mounting system to the earth.
Installation of the electric conduction mat on a work table.
( Recommendation humidity: 40 - 60%)
PRODUCT SPECIFICATION FOR IMFORMATION
Panasonic Electronic Devices Co., Ltd.
ERJXGN
2
, H
2
S, NH
3
Spec. No.
, SO
151-SRJ-EX07A
2
11
, and NO
-
8
X
.