DLP-TEMP-G DLP Design Inc, DLP-TEMP-G Datasheet
DLP-TEMP-G
Specifications of DLP-TEMP-G
Available stocks
Related parts for DLP-TEMP-G
DLP-TEMP-G Summary of contents
Page 1
... The DLP-TEMP USB/microcontroller based 3-channel data-acquisition system preprogrammed with firmware for digital I/O or reading digital temperature-sensing devices. The DLP-TEMP-G board is equipped with a Type A male USB connector for direct connection to a USB port. No cable is required unless the board located away from the PC, in which case a user supplied USB A-A (male-female) extension cable can be used ...
Page 2
... The VCP driver files can be downloaded for free from dlpdesign.com or ftdichip.com. Once the drivers are loaded and the com port number for the DLP-TEMP-G is set in Device Manager, the application program running on the host simply opens what it thinks is an RS232 port (9600 and begins communicating with the 12F683 microcontroller ...
Page 3
... APPLICATION The DLP-TEMP-G can be used to monitor temperature at the board distance from the board. The board supports monitoring of two temperatures. If more than two temperature measure-ments are required, then the DLP-TEMP9 can be used to monitor/measure up to nine temperatures. The board comes with one sensor that is not soldered to the board so that the user has the option of locating the sensor at a distance from the board using Category 5 cable ...
Page 4
... This product and its documentation are supplied on an as-is basis, and no warranty as to their suitability for any particular purpose is either made or implied. DLP Design will not accept any claim for damages whatsoever arising as a result of use or failure of this product. Your statutory rights are not affected ...
Page 5
GP1/PGC 5 GP2 4 GP3/Vpp 7 GP0/PGD AGND GND GND GND TEST 4 VCCIO ...