LS7-75NL-2 Panduit Corp, LS7-75NL-2 Datasheet - Page 13
![TAPE IND 3/4"X 26.2' BLK ON CLR](/photos/23/36/233677/4704831_sml.jpg)
LS7-75NL-2
Manufacturer Part Number
LS7-75NL-2
Description
TAPE IND 3/4"X 26.2' BLK ON CLR
Manufacturer
Panduit Corp
Series
PANACEA™r
Type
Labelr
Specifications of LS7-75NL-2
Label Type
Thermal Transfer
Label Size
0.75" x 26.2' (19.1mm x 8.0m)
Rohs Status
Not applicable
Color
Clear
Label Material
Polyester
Background Color
Clear
Legend
Blank
Pack Quantity
1
Product
Fiber Optic Cable Identification System
Features
Provides larger labeling surface on small cables allowing legends to be clearly seen
Length
314.96 in
For Use With/related Products
Thermal Transfer Printer
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
298-1346
A single LS7 tape cas sette is supplied with this unit. This machine has been designed to
allow the tape cassette to be changed quickly and easily.
To change the LS7 tape cassette:
1
2
3
4
5
6
7
10
Remove the back cover by pressing in on the rough area at the top end of the machine
and pulling off the cover. Pulling off the back cover lifts up the tape release lever.
If a tape cas sette is already installed, remove it by pulling it straight out.
If the ink ribbon in the other tape cassette is loose, use your finger to wind the toothed
wheel in the direction of the arrow on the cassette until there is no slack in the ribbon.
Insert the tape cassette firmly into the tape compartment, making sure that the entire
back of the cassette touches the bottom of the compartment.
Attach the back cover by inserting the tab on the bottom end of the cover into the slot
on the bottom end of the machine, then pushing down firmly on the top end of the
cover until it snaps into place.
Turn on the machine if it is off, and then feed the tape to remove any slack by holding
down
Press in the tape cutter lever to cut off any excess tape.
If you are using a new tape cassette provided with a stopper, be s ure to remove
the stopper before installing the cassette.
Make sure that the end of the tape feeds under the cassette tape guides.
When inserting the tape cassette, make sure that the inner ribbon does not catch
on the corner of the metal guide.
Code
and pressing
TAPE CASSETTE
Sym.
Feed
once.