129-0701-302 Emerson Network Power, 129-0701-302 Datasheet - Page 257

• Manufacturer Part Number: 129-0701-302
• Description: CONN JACK TEST SHIELD RIGHT ANGL
• Manufacturer: Emerson Network Power
• Type: Tip Jackr

Specifications of 129-0701-302

• Gender: Female
• Plug/mating Plug Diameter: Standard
• Mounting Type: Through Hole, Horizontal
• Termination: Solder
• Insulation: Non-Insulated
• Contact Finish: Gold
• Contact Material: Beryllium Copper
• Body Material: TFE Fluorocarbon
• Operating Temperature: -65°C ~ 85°C
• Color: Silver
• Contact Plating: Gold
• Equipment Type: Shielded Test Jack
• Voltage Rating: 2000 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1290701302; J571

Standard UHF Straight 2-Piece Crimp Type Jack
for Flexible Cable
PART NO.
CPF-249-1
Connectivity Solutions
CABLE
RG-58
WIRE GAUGE
20
Tel: [phone]
WIRE DECIMAL
.325 (0.83)
•
Fax: [phone]
.185 (4.70)-.205 (5.21)
JACKET O.D.
Assembly Instructions
•
www.EmersonNetworkPower.com/connectivity
(BRAID HEX)
.320 (8.13)
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
CRIMP
1. Identify connector parts. (2 piece parts)
2. Slide crimp sleeve over cable and strip
3. Flair braid and fold back. Strip cable insu-
4. Insert center conductor into the guide hole
5. Arrange braid uniformly around crimp stem.
cable jacket to dimension shown. Do not
nick braid or center conductor during strip
operations.
lation to dimension shown. Do not nick
center conductor.
found in the rear of the connector body.
Twist the body onto the center conductor
until the cable insulation butts up to the
body.
Slide crimp sleeve over braid and crimp
securely using recommended crimp tool.
(STRAIN RELIEF)
.211 (5.36)
CRIMP
RECOMMENDED
CRIMP TOOL
24-9858P
257