ERO-S2PHF6652 Panasonic - ECG, ERO-S2PHF6652 Datasheet - Page 4
![no-image](/images/manufacturer_photos/0/5/509/panasonic_-_ecg_sml.jpg)
ERO-S2PHF6652
Manufacturer Part Number
ERO-S2PHF6652
Description
RES 66.5K OHM METAL FILM 1/4W 1%
Manufacturer
Panasonic - ECG
Series
EROr
Datasheet
1.ERO-S2PHF1150.pdf
(4 pages)
Specifications of ERO-S2PHF6652
Resistance (ohms)
66.5K
Power (watts)
0.25W, 1/4W
Composition
Metal Film
Temperature Coefficient
±50ppm/°C
Tolerance
±1%
Size / Dimension
0.067" Dia x 0.126" L (1.70mm x 3.20mm)
Lead Style
Through Hole
Package / Case
Axial
Resistance In Ohms
66.5K
Case
Axial
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Height
-
Other names
EROS2PHF6652
(1) Precautions for use
(2) Precautions for storage
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
• When using our products, no matter what sort of equipment they might be used for, be sure to make a written
• Do not use the products beyond the specifi cations described in this catalog.
• This catalog explains the quality and performance of the products as individual components. Be fore use, check
• Install the following systems for a failsafe design to ensure safety if these products are to be used in equip ment
✽ Systems equipped with a protection circuit and a protection device
✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault
• These products are designed and manufactured for general and stan dard use in general elec tron ic
• These products are not intended for use in the following special conditions. Be fore using the products, care ful ly
• These products generate Joule heat when energized. Carefully position these products so that their heat will not
• Carefully position these products so that their temperatures will not exceed the category temperature range due
• Note that non- cleaning solder, halogen-based highly active fl ux, or water-soluble fl ux may deteriorate the
• Carefully select a fl ux cleaning agent for use after soldering. An unsuitable agent may deteriorate the
(Common precautions for Fixed Resistors)
agreement on the specifi cations with us in advance. The design and specifi cations in this catalog are subject
to change without prior notice.
and evaluate their operations when installed in your products.
where a defect in these products may cause the loss of human life or other signifi cant damage, such as damage to
vehicles (au to mo bile, train, vessel), traffi c lights, medical equipment, aerospace equipment, elec tric heating
ap pli anc es, com bus tion/gas equipment, rotating equipment, and disaster/crime prevention equip ment.
equipment (e.g. AV equipment, home electric ap pli anc es, offi ce equipment, information and com mu ni ca tion
equipment)
check the effects on their quality and performance, and determine whether or not they can be used.
1. In liquid, such as water, oil, chemicals, or organic solvent
2. In direct sunlight, outdoors, or in dust
3. In salty air or air with a high concentration of corrosive gas, such as Cl
4. Electric Static Discharge (ESD) Environment
5. Electromagnetic Environment
6. In an environment where these products cause dew condensation
7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin
affect the other components.
to the effects of neighboring heat-generating com po nents. Do not mount or place heat-generating com po nents or
infl ammables, such as vinyl-coated wires, near these products .
performance or reliability of the products.
performance or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave
water res i dues. Otherwise, the insulation performance may be deteriorated.
The performance of these products, including the solderability, is guaranteed for a year from the date of arrival at your
company, provided that they remain packed as they were when delivered and stored at a temperature of 5 °C to 35 °
C and a relative humidity of 45 % to 85 %.
Even within the above guarantee periods, do not store these products in the fol low ing conditions. Otherwise, their
elec tri cal performance and/or solderability may be deteriorated, and the packaging materials (e.g. tap ing ma te ri als)
may be de formed or deteriorated, resulting in mounting failures.
1. In salty air or in air with a high concentration of corrosive gas, such as Cl
2. In direct sunlight
Safety Precautions
or other materials
These components are sensitive to static electricity and can be damaged under static shock (ESD).
Please take measures to avoid any of these environments.
Smaller components are more sensitive to ESD environment.
Avoid any environment where strong electromagnetic waves exist.
– ER3 –
2
, H
2
, H
2
S, NH
2
S, NH
3
, SO
3
, SO
2
, or NO
2
, or NO
2
2
Feb. 2006