SFR2500006191FR500 Vishay, SFR2500006191FR500 Datasheet - Page 13

• Manufacturer Part Number: SFR2500006191FR500
• Description: RES 6.19K OHM METAL FILM .40W 1%
• Manufacturer: Vishay
• Series: SFR25r
• Type: Standard Metal Film Leaded Resistorsr

Specifications of SFR2500006191FR500

• Temperature Coefficient: ±100ppm/°C
• Resistance (ohms): 6.19K
• Power (watts): 0.4W
• Composition: Metal Film
• Tolerance: ±1%
• Size / Dimension: 0.098" Dia x 0.295" L (2.50mm x 7.50mm)
• Lead Style: Through Hole
• Package / Case: Axial
• Resistance In Ohms: 6.19K
• Case: Axial
• Resistance: 6.19kohm
• Resistance Tolerance: ± 1%
• Power Rating: 400mW
• Voltage Rating: 250V
• Resistor Element Material: Metal Film
• Termination Style: Axial
• Operating Temperature Range: - 55 C to + 125 C
• Dimensions: 2.5 mm Dia. x 6.5 mm L
• Product: Metal Film Resistors Low Noise
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -
• Height: -
• Lead Free Status / Rohs Status: Details
• Other names: 5043ED6K190F12AF5; PPC6.19KYTR

TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with the schedule of
“IEC publication 60115-1”, category 55/155/56 (rated temperature range
the requirements specified by EIA and EIAJ.
The tests are carried out in accordance with IEC publication 60068-2,
“Recommended basic climatic and mechanical robustness testing
procedure for electronic components” and under standard atmospheric
conditions according to “IEC 60068-1”, subclause 5.3.
Table 7
4.16
4.16.2
4.16.3
4.16.4
4.17
4.18
4.19
4.20
4.22
55 C to +155 C; damp heat, long term, 56 days). The testing also covers
60115-1
CLAUSE
IEC
Test procedures and requirements
21 (U)
21 (Ua1)
21 (Ub)
21 (Uc)
20 (Ta)
20 (Tb)
14 (Na)
29 (Eb)
6 (Fc)
METHOD
60068-2
TEST
IEC
robustness of
terminations:
solderability
resistance to
soldering heat
rapid change of
temperature
bump
vibration
tensile all samples
bending half
number of
samples
torsion other half
of samples
TEST
3
thermal shock: 3 s; 350 C;
6 mm from body
30 minutes at 55 C and
30 minutes at +155 C; 5 cycles
3
40 g
frequency 10 to 500 Hz;
displacement 1.5 mm or
acceleration 10 g; 3 directions;
total 6 hours (3
2 s; 235 C; flux 600
0.45 mm, load 5 N; 10 s
0.58 mm, load 10 N; 10 s
0.45 mm, load 2.5 N; 4
0.58 mm, load 5 N; 4
360 in opposite directions
1500 bumps in 3 directions;
PROCEDURE
2 hours)
90
90
In Table 7 the tests and requirements are listed with reference to the relevant
clauses of “IEC publications 60115-1 and 60068-2”; a short description of
the test procedure is also given. In some instances deviations from the IEC
recommendations were necessary for our method of specifying.
RESISTANCE
RANGE
(5033E)
SFR16S
number of failures 10
number of failures 10
R/R max.: 0.25% + 0.05
R/R max.: 0.25% + 0.05
R/R max.: 0.25% + 0.05
R/R max.: 0.25% + 0.05
R/R max.: 0.25% + 0.05
good tinning; no damage
REQUIREMENTS
no damage
no damage
no damage
(5043E)
SFR25
10
10
(5053H)
SFR25H
6
6