MBB02070C2210FRP00 Vishay, MBB02070C2210FRP00 Datasheet - Page 6
![RES 221 OHM METL FILM .60W 1% T/](/photos/13/75/137507/0207_221_ohm_sml.jpg)
MBB02070C2210FRP00
Manufacturer Part Number
MBB02070C2210FRP00
Description
RES 221 OHM METL FILM .60W 1% T/
Manufacturer
Vishay
Series
MBB 0207r
Specifications of MBB02070C2210FRP00
Resistance
221ohm
Resistance Tolerance
± 1%
Power Rating
600mW
Voltage Rating
350V
Resistor Element Material
Thin Film
Temperature Coefficient
±50ppm/°C
Resistance (ohms)
221
Power (watts)
0.6W
Composition
Metal Film
Tolerance
±1%
Size / Dimension
0.098" Dia x 0.256" L (2.50mm x 6.50mm)
Lead Style
Through Hole
Package / Case
Axial
Resistance In Ohms
221
Case
Axial
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Height
-
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
2312 815 12211
2312 915 12211
B0207C221R0F5TBC
BC221ZTR
2312 915 12211
B0207C221R0F5TBC
BC221ZTR
DESCRIPTION
Production is strictly controlled and follows an extensive
set of instructions established for reproducibility. A
homogeneous film of metal alloy is deposited on a high grade
ceramic body and conditioned to achieve the desired
temperature coefficient. Plated steel termination caps are
firmly pressed on the metallized rods. A special laser is used
to achieve the target value by smoothly cutting a helical
groove in the resistive layer without damaging the ceramics.
Connecting wires of electrolytic copper plated with 100 %
pure tin are welded to the termination caps. The resistor
elements are covered by a light blue protective coating
designed for electrical, mechanical and climatic protection.
Four or five color code rings designate the resistance value
and tolerance in accordance with IEC 60062.
The result of the determined production is verified by an
extensive testing procedure performed on 100 % of the
individual resistors. Only accepted products are stuck
directly on the adhesive tapes in accordance with
IEC 60286-1 or for the radial versions in accordance to
IEC 60286-2.
ASSEMBLY
The resistors are suitable for processing on automatic
insertion equipment and cutting and bending machines.
Excellent solderability is proven, even after extended
storage. They are suitable for automatic soldering using
wave or dipping.
The resistors are completely lead (Pb)-free, the pure tin
plating provides compatibility with lead (Pb)-free and
lead-containing soldering processes. The immunity of the
plating against tin whisker growth has been proven under
extensive testing.
The encapsulation is resistant to all cleaning solvents
commonly used in the electronics industry, including
alcohols, esters and aqueous solutions. The suitability of
conformal coatings, if applied, shall be qualified by
appropriate means to ensure the long-term stability of the
whole system.
All
CEFIC-EECA-EICTA
hazardous substances. This includes full compliance with
the following directives:
Notes
(1)
(2)
Document Number: 28766
Revision: 23-Jul-10
Global Automotive Declarable Substance List, see
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European
trade
www.eicta.org/index.php?id=1053&id_article=340
products
organisation
comply
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
(2)
representing
with
list of legal restrictions on
GADSL
For technical questions, contact:
Professional Thin Film Leaded Resistors
the
information
(1)
www.gadsl.org
and
and
the
communications
filmresistorsleaded@vishay.com
• 2000/53/EC End of Vehicle Life Directive (ELV) and
• 2002/95/EC Restriction of the use of Hazardous
• 2002/96/EC Waste Electrical and Electrical Equipment
APPROVALS
The resistors (CECC version) are approved within the
IECQ-CECC Quality Assessment System for Electronic
Components to the detail specification EN 140101-806
which refers to EN 60115-1 and EN 140100 and the variety
of environmental test procedures of the IEC 60068 series.
Conformity is attested by the use of the CECC logo (
the Mark of Conformity on the package label for the CECC
version.
Vishay
Manufacturer" in accordance with IEC QC 001002-3,
clause 2. The release certificate for "Technology Approval
Schedule" in accordance with CECC 240001 based on
IEC QC 001002-3, clause 6 is granted for the Vishay
BEYSCHLAG manufacturing process.
RELATED PRODUCTS
This product family of leaded thin film resistors for
professional applications is complemented by Zero Ohm
Jumpers.
For a corelated range of precision TCR and tolerance
specifications see the datasheet:
• “Precision Thin Film Leaded Resistors”, document no.
For products approved to EN 140101-806, version E, with
established reliability and failure rate level E7 (Quality factor
π
• “Established Reliability Thin Film Leaded Resistors”,
Q
Annex II (ELVII)
Substances Directive (RoHS)
Directive (WEEE)
28767
document no. 28768
= 0.1), see the datasheet:
BEYSCHLAG
technology
and
has
consumer
Vishay Beyschlag
achieved
electronics),
"Approval
www.vishay.com
) as
see
of
27